http://www.auto-professionals.co.uk/ Thu, 18 Jun 2026 17:38:31 +0000 MyBB http://www.auto-professionals.co.uk/showthread.php?tid=24341 Mon, 31 Mar 2025 08:49:45 +0000 http://www.auto-professionals.co.uk/showthread.php?tid=24341 ECU: EDC16U31.
Thanks.

_ext_eeprom.zip
File Type:
Downloaded:	0 times
Size:	1.23 KB

]]> ECU: EDC16U31.
Thanks.

_ext_eeprom.zip
File Type:
Downloaded:	0 times
Size:	1.23 KB

]]> http://www.auto-professionals.co.uk/showthread.php?tid=24196 Sun, 18 Feb 2024 20:29:07 +0000 http://www.auto-professionals.co.uk/showthread.php?tid=24196 I changed the driver but it still doesn't work. The ECU has fault codes:
B162B (left low beam control circuit low), B162C (left low beam control circuit high) and B2215 (FCM Internal).
I have heard that the fault counter is full and must be reset.

mac7131mvf_data_flash.rar
File Type:
Downloaded:	4 times
Size:	883 bytes

mac7131mvf_flash.rar
File Type:
Downloaded:	0 times
Size:	156.98 KB

]]> I changed the driver but it still doesn't work. The ECU has fault codes:
B162B (left low beam control circuit low), B162C (left low beam control circuit high) and B2215 (FCM Internal).
I have heard that the fault counter is full and must be reset.

mac7131mvf_data_flash.rar
File Type:
Downloaded:	4 times
Size:	883 bytes

mac7131mvf_flash.rar
File Type:
Downloaded:	0 times
Size:	156.98 KB

]]> http://www.auto-professionals.co.uk/showthread.php?tid=24036 Tue, 11 Apr 2023 16:22:26 +0000 http://www.auto-professionals.co.uk/showthread.php?tid=24036 ECU: 68530280AA
Thanks.

M95128_crash.rar
File Type:
Downloaded:	2 times
Size:	4.21 KB

]]> ECU: 68530280AA
Thanks.

M95128_crash.rar
File Type:
Downloaded:	2 times
Size:	4.21 KB

]]> http://www.auto-professionals.co.uk/showthread.php?tid=23983 Tue, 31 Jan 2023 10:03:12 +0000 http://www.auto-professionals.co.uk/showthread.php?tid=23983 http://www.auto-professionals.co.uk/showthread.php?tid=23636 Wed, 15 Dec 2021 16:11:10 +0000 http://www.auto-professionals.co.uk/showthread.php?tid=23636
I have stuck with Immo box.
I have second hand Immo box, I have the PIN of it.
The original EEPROM of Immo went somehow during the desoldering, I cannot read it anymore. (I know the PIN of car).
Does anybody make this dump to virgin?
Because the EEPROM is VERY small, I find too difficult just to ''play'' with it.

Thank you.

caliber second hand eeprom L16.zip
File Type:
Downloaded:	2 times
Size:	467 bytes

]]>
I have stuck with Immo box.
I have second hand Immo box, I have the PIN of it.
The original EEPROM of Immo went somehow during the desoldering, I cannot read it anymore. (I know the PIN of car).
Does anybody make this dump to virgin?
Because the EEPROM is VERY small, I find too difficult just to ''play'' with it.

Thank you.

caliber second hand eeprom L16.zip
File Type:
Downloaded:	2 times
Size:	467 bytes

]]> http://www.auto-professionals.co.uk/showthread.php?tid=22610 Wed, 27 Nov 2019 12:07:15 +0000 http://www.auto-professionals.co.uk/showthread.php?tid=22610 You know an ECU unlock programming tool to unlock the tuning protection from the 2015 up Chrysler ECM?]]> You know an ECU unlock programming tool to unlock the tuning protection from the 2015 up Chrysler ECM?]]> http://www.auto-professionals.co.uk/showthread.php?tid=22401 Mon, 26 Aug 2019 01:50:48 +0000 http://www.auto-professionals.co.uk/showthread.php?tid=22401 Its possible to virginized RF hub module?
MCU 9S12XEG384.]]> Its possible to virginized RF hub module?
MCU 9S12XEG384.]]> http://www.auto-professionals.co.uk/showthread.php?tid=21753 Sat, 08 Dec 2018 01:48:13 +0000 http://www.auto-professionals.co.uk/showthread.php?tid=21753 What tool is capable to do that?]]> What tool is capable to do that?]]> http://www.auto-professionals.co.uk/showthread.php?tid=21148 Mon, 28 May 2018 08:32:51 +0000 http://www.auto-professionals.co.uk/showthread.php?tid=21148
I need Immo OFF to this car.

I have a Chrysler Stratus Cabriolet 2.0 Benzine year 1999 with a Blue Module SRi and ECU 04745860, 64490.
Car have chip in key and ignition ring and Blue Module SRi…
I have made Immo OFF by SRI module and it works for the original ECU (Immo always disconnect and car always start).
I bought a used ECU to this car (but car never worked without changes in hardware), I swapped eeprom and flash from original ECU to used but car just worked first time for 3 seconds. ECU is fine i can communicate with ECU, 3 seconds after worked, car stops and don't start anymore. When i made diagnostic I don't have any error in ECU.

Attached goes 95040 eeprom read from ECU after swap to the used and work one time.
Any Immo OFF to this ECU?
Thanks.
Regards.

95040 stratus after swap chips.rar
File Type:
Downloaded:	3 times
Size:	248 bytes

]]>
I need Immo OFF to this car.

I have a Chrysler Stratus Cabriolet 2.0 Benzine year 1999 with a Blue Module SRi and ECU 04745860, 64490.
Car have chip in key and ignition ring and Blue Module SRi…
I have made Immo OFF by SRI module and it works for the original ECU (Immo always disconnect and car always start).
I bought a used ECU to this car (but car never worked without changes in hardware), I swapped eeprom and flash from original ECU to used but car just worked first time for 3 seconds. ECU is fine i can communicate with ECU, 3 seconds after worked, car stops and don't start anymore. When i made diagnostic I don't have any error in ECU.

Attached goes 95040 eeprom read from ECU after swap to the used and work one time.
Any Immo OFF to this ECU?
Thanks.
Regards.

95040 stratus after swap chips.rar
File Type:
Downloaded:	3 times
Size:	248 bytes

]]> http://www.auto-professionals.co.uk/showthread.php?tid=21068 Fri, 04 May 2018 14:34:24 +0000 http://www.auto-professionals.co.uk/showthread.php?tid=21068
I need immo off for this car.
I have a Chrysler Stratus Cabriolet 2.0 benzine year 1999 with a blue module SRI with Nr. 04671228 and MCU HC11E20 PLCC.
Car have chip in key and ignition ring...
I tried to change just line 01C and 195 to FF... Like many descriptions i've seen, i need 00 in line 01C and 14 in line 195...
My dump have 00 in 01C but in 195 i already have FF... I tried change 00 to FF in line 01C and disconnected ignition ring but car don't start...
There's any way to unblock this or is needed put all to FF and after that add line by line till have all features working?
There's any immo off dump that made already for this car?
Attached goes to the dump, read and confirmed with 2nd and 3rd read... All info's i have bellow.

Anyone can help?
Thanks.

Chrysler Cabrio
2.0 gasoline
1997 year
Driver flooded by gelatin.
With processor HC16, car unlocked by Remote Control Receiver under the steering wheel with 24c01A - unhook!!!
Module SRI in fuse box on the left side with HC11E20 52 PLCC.
There is an record of kilometers in line 030 and 040 let it be as it is and the rest fill with FF and car will start.
Not everything works properly so we need to do fit of the parameters by prescribing line by line.
In final version clean into FF 01C and 195.

central stratus hc11e20 ori.rar
File Type:
Downloaded:	4 times
Size:	583 bytes

]]>
I need immo off for this car.
I have a Chrysler Stratus Cabriolet 2.0 benzine year 1999 with a blue module SRI with Nr. 04671228 and MCU HC11E20 PLCC.
Car have chip in key and ignition ring...
I tried to change just line 01C and 195 to FF... Like many descriptions i've seen, i need 00 in line 01C and 14 in line 195...
My dump have 00 in 01C but in 195 i already have FF... I tried change 00 to FF in line 01C and disconnected ignition ring but car don't start...
There's any way to unblock this or is needed put all to FF and after that add line by line till have all features working?
There's any immo off dump that made already for this car?
Attached goes to the dump, read and confirmed with 2nd and 3rd read... All info's i have bellow.

Anyone can help?
Thanks.

Chrysler Cabrio
2.0 gasoline
1997 year
Driver flooded by gelatin.
With processor HC16, car unlocked by Remote Control Receiver under the steering wheel with 24c01A - unhook!!!
Module SRI in fuse box on the left side with HC11E20 52 PLCC.
There is an record of kilometers in line 030 and 040 let it be as it is and the rest fill with FF and car will start.
Not everything works properly so we need to do fit of the parameters by prescribing line by line.
In final version clean into FF 01C and 195.

central stratus hc11e20 ori.rar
File Type:
Downloaded:	4 times
Size:	583 bytes

]]> http://www.auto-professionals.co.uk/showthread.php?tid=20454 Mon, 27 Nov 2017 10:12:18 +0000 http://www.auto-professionals.co.uk/showthread.php?tid=20454 2007 Dodge Caliber 2007 2.0 HDi.
Has got a skim problem, it's there any way can remove this immo off or skim off?]]> 2007 Dodge Caliber 2007 2.0 HDi.
Has got a skim problem, it's there any way can remove this immo off or skim off?]]> http://www.auto-professionals.co.uk/showthread.php?tid=20212 Wed, 27 Sep 2017 18:03:01 +0000 http://www.auto-professionals.co.uk/showthread.php?tid=20212
ECU: 0 281 001 768
Eeprom: B58253
Here is dump from ECU.

Thanks in advance!

24C02 CHRYSLER.rar
File Type:
Downloaded:	1 times
Size:	206 bytes

]]>
ECU: 0 281 001 768
Eeprom: B58253
Here is dump from ECU.

Thanks in advance!

24C02 CHRYSLER.rar
File Type:
Downloaded:	1 times
Size:	206 bytes

]]> http://www.auto-professionals.co.uk/showthread.php?tid=19570 Wed, 05 Apr 2017 11:49:02 +0000 http://www.auto-professionals.co.uk/showthread.php?tid=19570

M95128_crash.rar
File Type:
Downloaded:	1 times
Size:	3.37 KB

]]>

M95128_crash.rar
File Type:
Downloaded:	1 times
Size:	3.37 KB

]]> http://www.auto-professionals.co.uk/showthread.php?tid=17262 Wed, 17 Feb 2016 12:17:18 +0000 http://www.auto-professionals.co.uk/showthread.php?tid=17262 56054 092AH

M95128_crash.rar
File Type:
Downloaded:	2 times
Size:	2.71 KB

]]> 56054 092AH

M95128_crash.rar
File Type:
Downloaded:	2 times
Size:	2.71 KB

]]> http://www.auto-professionals.co.uk/showthread.php?tid=16985 Wed, 06 Jan 2016 16:50:57 +0000 http://www.auto-professionals.co.uk/showthread.php?tid=16985

pic1.rar
File Type:
Downloaded:	4 times
Size:	3.88 MB

pic2.rar
File Type:
Downloaded:	2 times
Size:	3.71 MB

]]>

pic1.rar
File Type:
Downloaded:	4 times
Size:	3.88 MB

pic2.rar
File Type:
Downloaded:	2 times
Size:	3.71 MB

]]> http://www.auto-professionals.co.uk/showthread.php?tid=15222 Tue, 28 Apr 2015 04:00:29 +0000 http://www.auto-professionals.co.uk/showthread.php?tid=15222 Does anybody know how to add in a Chrysler Proximity key?
Costumer have one working key and he would like to add 1 more key.
I try with AVDI but not any support.
I have also Chrysler WiTech Pod but i couldn't find in which module should i go to add one more key, also i don't know if i can add key offline.
Any info would be appreciated.
Thanks.

chrysler Proximity key.jpeg
File Type:
Downloaded:	14 times
Size:	7.33 KB

]]> Does anybody know how to add in a Chrysler Proximity key?
Costumer have one working key and he would like to add 1 more key.
I try with AVDI but not any support.
I have also Chrysler WiTech Pod but i couldn't find in which module should i go to add one more key, also i don't know if i can add key offline.
Any info would be appreciated.
Thanks.

chrysler Proximity key.jpeg
File Type:
Downloaded:	14 times
Size:	7.33 KB

]]> http://www.auto-professionals.co.uk/showthread.php?tid=15078 Fri, 10 Apr 2015 15:28:48 +0000 http://www.auto-professionals.co.uk/showthread.php?tid=15078 Where the mileage stored in this vehicle?
Already I open instrument cluster and see 2 chips 0496AA, is any of them who stored the mileage and if yes which one is it?]]> Where the mileage stored in this vehicle?
Already I open instrument cluster and see 2 chips 0496AA, is any of them who stored the mileage and if yes which one is it?]]> http://www.auto-professionals.co.uk/showthread.php?tid=14855 Thu, 19 Mar 2015 06:01:31 +0000 http://www.auto-professionals.co.uk/showthread.php?tid=14855
This car mileage per gas (MPG) does not read at all, on the dash and i will like to know if there is some settings that need to be done before this begin to work, it has stuck at 0.3 and it wont read...

Repair history on this car is, ECM was changed and pinion factor has also being set.. so what could be the reason why the dash is not getting the reading of the mpg.]]>
This car mileage per gas (MPG) does not read at all, on the dash and i will like to know if there is some settings that need to be done before this begin to work, it has stuck at 0.3 and it wont read...

Repair history on this car is, ECM was changed and pinion factor has also being set.. so what could be the reason why the dash is not getting the reading of the mpg.]]> http://www.auto-professionals.co.uk/showthread.php?tid=14034 Tue, 30 Dec 2014 20:14:22 +0000 http://www.auto-professionals.co.uk/showthread.php?tid=14034 I need to clone from Dodge Caliber key transponder (2007).

Its ID46

Does it works with the AVDI Key Tag?]]> I need to clone from Dodge Caliber key transponder (2007).

Its ID46

Does it works with the AVDI Key Tag?]]> http://www.auto-professionals.co.uk/showthread.php?tid=13935 Fri, 19 Dec 2014 07:22:32 +0000 http://www.auto-professionals.co.uk/showthread.php?tid=13935
Password: http://www.auto-professionals.co.uk/

Chrysler Dash.rar
File Type:
Downloaded:	11 times
Size:	15.01 KB

]]>
Password: http://www.auto-professionals.co.uk/

Chrysler Dash.rar
File Type:
Downloaded:	11 times
Size:	15.01 KB

]]>