http://www.auto-professionals.co.uk/ Sun, 21 Jun 2026 15:31:35 +0000 MyBB http://www.auto-professionals.co.uk/showthread.php?tid=24297 Fri, 01 Nov 2024 09:29:13 +0000 http://www.auto-professionals.co.uk/showthread.php?tid=24297
For this MY12 USA Sportage Kia with VVT SL10 2L engine, I have 2 references for any of the oxygen sensor:
Front:
- 39210-26100
- 39210-26650
Rear:
- 39210-26380
- 39210-26200

Can someone tell me which ones are the right ones?

Thanks.]]>
For this MY12 USA Sportage Kia with VVT SL10 2L engine, I have 2 references for any of the oxygen sensor:
Front:
- 39210-26100
- 39210-26650
Rear:
- 39210-26380
- 39210-26200

Can someone tell me which ones are the right ones?

Thanks.]]> http://www.auto-professionals.co.uk/showthread.php?tid=22984 Mon, 15 Jun 2020 12:58:30 +0000 http://www.auto-professionals.co.uk/showthread.php?tid=22984 I fight with low pressure and DTC P1186 in a KIA Ceed 2009 year 1.6 CRDi without DPF filter.
I cleaned fuel sender in tank, changed regulating valve on rail, fuel pressure sensor, fuel pump with regulating valve, bypassed fuel filter, changed injectors and still the same, about 140Km/h and then no power and set P1186.
Any ideas?]]> I fight with low pressure and DTC P1186 in a KIA Ceed 2009 year 1.6 CRDi without DPF filter.
I cleaned fuel sender in tank, changed regulating valve on rail, fuel pressure sensor, fuel pump with regulating valve, bypassed fuel filter, changed injectors and still the same, about 140Km/h and then no power and set P1186.
Any ideas?]]> http://www.auto-professionals.co.uk/showthread.php?tid=22964 Thu, 04 Jun 2020 01:20:27 +0000 http://www.auto-professionals.co.uk/showthread.php?tid=22964 I am working on 2013 Kia Sorento XM 2.2 diesel vehicle.
Problem, when trying to start vehicle via start stop button, instrument cluster message check steering lock system.
No ignition, steering remains lock. Battery good, can actuation's via BCM of all relay good.
Any suggestions will be appreciated.]]> I am working on 2013 Kia Sorento XM 2.2 diesel vehicle.
Problem, when trying to start vehicle via start stop button, instrument cluster message check steering lock system.
No ignition, steering remains lock. Battery good, can actuation's via BCM of all relay good.
Any suggestions will be appreciated.]]> http://www.auto-professionals.co.uk/showthread.php?tid=22960 Tue, 02 Jun 2020 22:22:27 +0000 http://www.auto-professionals.co.uk/showthread.php?tid=22960 I don't know if its my eyes or wrong screen screen resolution but I cant read the pin numbers or wire colors, anyone got anything clearer?
Thanks.

]]> I don't know if its my eyes or wrong screen screen resolution but I cant read the pin numbers or wire colors, anyone got anything clearer?
Thanks.

]]> http://www.auto-professionals.co.uk/showthread.php?tid=22447 Mon, 16 Sep 2019 11:19:59 +0000 http://www.auto-professionals.co.uk/showthread.php?tid=22447 I have problem with Sorento BL from 2006 year and 2.5 WGT engine.
The case is it cutted off during drive and now engine can't start.
No DTC codes, fuel on rail 270bar during cranking, about 280rpm during cranking.
Is meens not to open injectors at all, it works on starter spray. No any DTC from IMMO and status is learnt.
Is there any INERTIA switch? I replaced crankshaft and camshaft sensors and no response. I cant see camshaft signal in GDS, there is no on list
Please for help.]]> I have problem with Sorento BL from 2006 year and 2.5 WGT engine.
The case is it cutted off during drive and now engine can't start.
No DTC codes, fuel on rail 270bar during cranking, about 280rpm during cranking.
Is meens not to open injectors at all, it works on starter spray. No any DTC from IMMO and status is learnt.
Is there any INERTIA switch? I replaced crankshaft and camshaft sensors and no response. I cant see camshaft signal in GDS, there is no on list
Please for help.]]> http://www.auto-professionals.co.uk/showthread.php?tid=21179 Thu, 07 Jun 2018 16:18:36 +0000 http://www.auto-professionals.co.uk/showthread.php?tid=21179

Today a Kia had an appointment for misfire at times, normally I do a car decoder to get familiarize with it, but for my surprise it is not listed in the Kia parts catalog, neither in GDS, neither on my scanner, so far I know it is a Kia K5 with VIN KNAGN418BEA450411, I double check the VIN, the only info there is, that the car is for Korea market.

My question is do Korean market use an apart EPC/GDS and so on?]]>

Today a Kia had an appointment for misfire at times, normally I do a car decoder to get familiarize with it, but for my surprise it is not listed in the Kia parts catalog, neither in GDS, neither on my scanner, so far I know it is a Kia K5 with VIN KNAGN418BEA450411, I double check the VIN, the only info there is, that the car is for Korea market.

My question is do Korean market use an apart EPC/GDS and so on?]]> http://www.auto-professionals.co.uk/showthread.php?tid=21142 Sat, 26 May 2018 09:29:10 +0000 http://www.auto-professionals.co.uk/showthread.php?tid=21142
I have KIA Carnival 2.9 CRDi KJ engine. This is old with solenoid type EGR and no VGT on turbine. There is problem with power. Max speed of car is 140 Km/h and after long driving when stop on lights and try to start the car does no react on accelerator at e to stop engine, wait, then it runs OK again. There is no any DTC in memory and this happens from time to time. Always when running with live data the car runs OK. Maybe somebody had similar problem?

- Fuel Tank Clear
- Fuel Filter Renewed
- Air Filter Cleared
- Turbo Pump Air Correctly
- No Any DTC]]>
I have KIA Carnival 2.9 CRDi KJ engine. This is old with solenoid type EGR and no VGT on turbine. There is problem with power. Max speed of car is 140 Km/h and after long driving when stop on lights and try to start the car does no react on accelerator at e to stop engine, wait, then it runs OK again. There is no any DTC in memory and this happens from time to time. Always when running with live data the car runs OK. Maybe somebody had similar problem?

- Fuel Tank Clear
- Fuel Filter Renewed
- Air Filter Cleared
- Turbo Pump Air Correctly
- No Any DTC]]> http://www.auto-professionals.co.uk/showthread.php?tid=19774 Thu, 25 May 2017 12:55:57 +0000 http://www.auto-professionals.co.uk/showthread.php?tid=19774

Kia Sportage 2.0i petrol 2010 MY.
VIN: KNAPC811MB7000475
Engine: G4KDAH300093

The symptoms:
On starting the vehicle, it runs for a few seconds and switches off. On the third or forth try it will idle with management light on.
It has 2x Fault codes P0605 and P2105.
I have checked and cleaned all earths, checked 12V. Still does not help.

Any advice will be grateful.

portage faults.bmp
File Type:
Downloaded:	6 times
Size:	382.55 KB

kia sportage info.bmp
File Type:
Downloaded:	6 times
Size:	382.55 KB

Kia Sportage ECU.jpg
File Type:
Downloaded:	8 times
Size:	39.06 KB

]]>

Kia Sportage 2.0i petrol 2010 MY.
VIN: KNAPC811MB7000475
Engine: G4KDAH300093

The symptoms:
On starting the vehicle, it runs for a few seconds and switches off. On the third or forth try it will idle with management light on.
It has 2x Fault codes P0605 and P2105.
I have checked and cleaned all earths, checked 12V. Still does not help.

Any advice will be grateful.

portage faults.bmp
File Type:
Downloaded:	6 times
Size:	382.55 KB

kia sportage info.bmp
File Type:
Downloaded:	6 times
Size:	382.55 KB

Kia Sportage ECU.jpg
File Type:
Downloaded:	8 times
Size:	39.06 KB

]]> http://www.auto-professionals.co.uk/showthread.php?tid=18985 Fri, 02 Dec 2016 15:13:12 +0000 http://www.auto-professionals.co.uk/showthread.php?tid=18985
I have problem with Kia Sorento (BL) 2004 year 2.5 CRDi.
Problem is with rear transfer case. I have 4x4 Auto and Low.
When i have on Aauto there is drive 4x4 all the time
When i change for Low, then nothing happens in transfer case and also on instrument cluster Low sign not appears.
There is automatic transmission and all conditions are meet like: neautal, hand brake, brake pedal depressed.
I have no any live data in KIA GDS tester.

Maybe someone had similar problem?
I checked transfer case ECU and installed other one without result.]]>
I have problem with Kia Sorento (BL) 2004 year 2.5 CRDi.
Problem is with rear transfer case. I have 4x4 Auto and Low.
When i have on Aauto there is drive 4x4 all the time
When i change for Low, then nothing happens in transfer case and also on instrument cluster Low sign not appears.
There is automatic transmission and all conditions are meet like: neautal, hand brake, brake pedal depressed.
I have no any live data in KIA GDS tester.

Maybe someone had similar problem?
I checked transfer case ECU and installed other one without result.]]> http://www.auto-professionals.co.uk/showthread.php?tid=18628 Tue, 27 Sep 2016 22:19:15 +0000 http://www.auto-professionals.co.uk/showthread.php?tid=18628 I have a problem with a KIA Carnival 2014 with 3.5 engine.
When you shift to D or R the engine rpm raise to 1500 and the engine also hesitate at that moment but at the neutral position the engine idle smooth and normal there are no DTC on engine and transmission side, throttle body has been cleaned but still the same.
Anybody knows what it can be the problem?
Thanks.]]> I have a problem with a KIA Carnival 2014 with 3.5 engine.
When you shift to D or R the engine rpm raise to 1500 and the engine also hesitate at that moment but at the neutral position the engine idle smooth and normal there are no DTC on engine and transmission side, throttle body has been cleaned but still the same.
Anybody knows what it can be the problem?
Thanks.]]> http://www.auto-professionals.co.uk/showthread.php?tid=18437 Tue, 23 Aug 2016 07:31:00 +0000 http://www.auto-professionals.co.uk/showthread.php?tid=18437 http://www.auto-professionals.co.uk/showthread.php?tid=17356 Tue, 01 Mar 2016 20:10:24 +0000 http://www.auto-professionals.co.uk/showthread.php?tid=17356 I have Diga Taho 2008 and Digiprog, but there is no this car.
With what tool i can read, write and adjust odometer in this car?]]> I have Diga Taho 2008 and Digiprog, but there is no this car.
With what tool i can read, write and adjust odometer in this car?]]> http://www.auto-professionals.co.uk/showthread.php?tid=16958 Sat, 02 Jan 2016 19:47:23 +0000 http://www.auto-professionals.co.uk/showthread.php?tid=16958
KIA Sorento 2011 VIN: 5XYKT3A13BG085406

I have some issue on the above car make, the check lite comes on, and it take about the exhaust camshaft position, i suspect that the last mechanic who set the timing might have not get it well... so i call in another guy to get it fix, this time the car could not start at all, complaining error code of both cam shaft...

I got the timing diagram of this model and was set, yet still the car wont have quick start, and you have to crank several time before it will start and when you leave the key, it will just shut off, which will give fault code of both intake and exhaust camshaft...

Please could someone help me a video of this model of engine, this is petrol, 2.4 liter engine..

This timing was set with the exact image gotten from the internet, but yet still it wont have quick start.

I have attached an image of what was looked on, trying to use it to set the time, yet car wont start quick, and when it start, it die...
Please help with some video or if you prefer can send real picture.

Thank you.

my settings.jpg
File Type:
Downloaded:	23 times
Size:	77.6 KB

]]>
KIA Sorento 2011 VIN: 5XYKT3A13BG085406

I have some issue on the above car make, the check lite comes on, and it take about the exhaust camshaft position, i suspect that the last mechanic who set the timing might have not get it well... so i call in another guy to get it fix, this time the car could not start at all, complaining error code of both cam shaft...

I got the timing diagram of this model and was set, yet still the car wont have quick start, and you have to crank several time before it will start and when you leave the key, it will just shut off, which will give fault code of both intake and exhaust camshaft...

Please could someone help me a video of this model of engine, this is petrol, 2.4 liter engine..

This timing was set with the exact image gotten from the internet, but yet still it wont have quick start.

I have attached an image of what was looked on, trying to use it to set the time, yet car wont start quick, and when it start, it die...
Please help with some video or if you prefer can send real picture.

Thank you.

my settings.jpg
File Type:
Downloaded:	23 times
Size:	77.6 KB

]]> http://www.auto-professionals.co.uk/showthread.php?tid=16640 Sat, 14 Nov 2015 13:34:24 +0000 http://www.auto-professionals.co.uk/showthread.php?tid=16640
Please kindly advise, what could be the cure to shifting transmission from P, to D, and when check from scan tool, instead of it to show current gear as 1, it show direct 3 and it start to change from 3 to 6.

Please i will like to know what could be the cause of this, there is no fault code in the ECM nor the TCM, but i do not understand why when gear is move from P to D, in the scan tool live data, it show 3 instead of 1.

Please help me, narrow where the problem could be coming from...

Thank you all.]]>
Please kindly advise, what could be the cure to shifting transmission from P, to D, and when check from scan tool, instead of it to show current gear as 1, it show direct 3 and it start to change from 3 to 6.

Please i will like to know what could be the cause of this, there is no fault code in the ECM nor the TCM, but i do not understand why when gear is move from P to D, in the scan tool live data, it show 3 instead of 1.

Please help me, narrow where the problem could be coming from...

Thank you all.]]> http://www.auto-professionals.co.uk/showthread.php?tid=16476 Wed, 21 Oct 2015 10:05:49 +0000 http://www.auto-professionals.co.uk/showthread.php?tid=16476
KIA Sorento 2011 VIN: 5XYKT3A13BG085406

This car, has no fault related to accelerator pedal or etc.

When key is turn on, you will hear the throttle cry out, i mean open and close, but when you press the pedal, the throttle does not open wide and close, it does not move a little bit even. Please i need help, there is no fault code, the only fault code is the VCM - variable control motor.

Please i want to know why when pedal pressed, there is no movement?
Thank you.]]>
KIA Sorento 2011 VIN: 5XYKT3A13BG085406

This car, has no fault related to accelerator pedal or etc.

When key is turn on, you will hear the throttle cry out, i mean open and close, but when you press the pedal, the throttle does not open wide and close, it does not move a little bit even. Please i need help, there is no fault code, the only fault code is the VCM - variable control motor.

Please i want to know why when pedal pressed, there is no movement?
Thank you.]]> http://www.auto-professionals.co.uk/showthread.php?tid=16038 Thu, 20 Aug 2015 00:09:33 +0000 http://www.auto-professionals.co.uk/showthread.php?tid=16038 I have a transmission problem with a KIA Sorento 2012 with automatic transmission.
The car goes only in reverse even when you put the shifter in D, N or R.
Shifter cable is OK even when you shift to N it stays Reverse.
Does anybody have a solution?
Thanks.]]> I have a transmission problem with a KIA Sorento 2012 with automatic transmission.
The car goes only in reverse even when you put the shifter in D, N or R.
Shifter cable is OK even when you shift to N it stays Reverse.
Does anybody have a solution?
Thanks.]]> http://www.auto-professionals.co.uk/showthread.php?tid=15917 Sun, 02 Aug 2015 12:04:27 +0000 http://www.auto-professionals.co.uk/showthread.php?tid=15917 http://www.auto-professionals.co.uk/showthread.php?tid=13512 Fri, 14 Nov 2014 22:25:50 +0000 http://www.auto-professionals.co.uk/showthread.php?tid=13512 I have a problem with a KIA Soul 2014.
The car jerking when accelerate and sometimes when slow down when press brake pedal and accelerate again.
There is no trouble code found I put another ignition coil and spark plugs same problem.
Anybody have an idea what it is?]]> I have a problem with a KIA Soul 2014.
The car jerking when accelerate and sometimes when slow down when press brake pedal and accelerate again.
There is no trouble code found I put another ignition coil and spark plugs same problem.
Anybody have an idea what it is?]]> http://www.auto-professionals.co.uk/showthread.php?tid=12618 Sat, 30 Aug 2014 19:02:40 +0000 http://www.auto-professionals.co.uk/showthread.php?tid=12618 http://www.auto-professionals.co.uk/showthread.php?tid=12046 Mon, 07 Jul 2014 13:51:52 +0000 http://www.auto-professionals.co.uk/showthread.php?tid=12046
I have problem with this car Kia Sorento 2002 2.5CRDI.
When i put in Auto i think 4wd working good, but when i click on the Low, in cluster light don't show Low wheel. And don't work.

Maybe some one can tell me were to find 4WD (transfer ecu)?
I searched in all car but don't find.

Thank you.]]>
I have problem with this car Kia Sorento 2002 2.5CRDI.
When i put in Auto i think 4wd working good, but when i click on the Low, in cluster light don't show Low wheel. And don't work.

Maybe some one can tell me were to find 4WD (transfer ecu)?
I searched in all car but don't find.

Thank you.]]>