http://www.auto-professionals.co.uk/ Fri, 08 May 2026 01:03:22 +0000 MyBB http://www.auto-professionals.co.uk/showthread.php?tid=24286 Fri, 18 Oct 2024 06:18:33 +0000 http://www.auto-professionals.co.uk/showthread.php?tid=24286 My 2018 RHD Transit Connect 1.5 has developed an issue in that the van won’t start.
As soon as I turn the key, it comes up immobilizer active, check handbook.

Scanned it and it comes up with B10D7-87 pats system fault.

I’ve had both keys checked and there fine. I’ve also replaced the immobilizer pick up ring at the ignition and still no joy.
Checked all the fuses. This all seems to have happened since my battery completely died and it’s been replaced for a like for like.

Does anybody have a wiring diagram for the wires coming from the pick up ring back to the BCM? Just want to check there’s no issues with the wires. I’ve had an auto locksmith come out and he’s saying for some reason the BCM isn’t communicating with the pick up ring. He used a device that picks up the coil energizing at the ignition when the key is turned. Said the coil wasn’t energizing for some reason.

Hope somebody can help.
Thanks.]]> My 2018 RHD Transit Connect 1.5 has developed an issue in that the van won’t start.
As soon as I turn the key, it comes up immobilizer active, check handbook.

Scanned it and it comes up with B10D7-87 pats system fault.

I’ve had both keys checked and there fine. I’ve also replaced the immobilizer pick up ring at the ignition and still no joy.
Checked all the fuses. This all seems to have happened since my battery completely died and it’s been replaced for a like for like.

Does anybody have a wiring diagram for the wires coming from the pick up ring back to the BCM? Just want to check there’s no issues with the wires. I’ve had an auto locksmith come out and he’s saying for some reason the BCM isn’t communicating with the pick up ring. He used a device that picks up the coil energizing at the ignition when the key is turned. Said the coil wasn’t energizing for some reason.

Hope somebody can help.
Thanks.]]> http://www.auto-professionals.co.uk/showthread.php?tid=24246 Sun, 07 Jul 2024 05:34:39 +0000 http://www.auto-professionals.co.uk/showthread.php?tid=24246 I have a question.
Can Fiesta CB1 year 2010 1.6 TDCI to program daytime running lights?
If so, what I can use to do.
Thank you for the information.]]> I have a question.
Can Fiesta CB1 year 2010 1.6 TDCI to program daytime running lights?
If so, what I can use to do.
Thank you for the information.]]> http://www.auto-professionals.co.uk/showthread.php?tid=24221 Fri, 12 Apr 2024 08:05:57 +0000 http://www.auto-professionals.co.uk/showthread.php?tid=24221
I have a Ford Fusion C-Max year 2007.
The battery ran out. The client changed battery and now car does not start.
I scanned with Abrites FVDI clone and says DTC B2139.

ECU is Bosch 0281011701
9BXC

Any help will be much appreciated.
Thank you very much.

Documents.zip
File Type:
Downloaded:	4 times
Size:	7.03 MB

]]>
I have a Ford Fusion C-Max year 2007.
The battery ran out. The client changed battery and now car does not start.
I scanned with Abrites FVDI clone and says DTC B2139.

ECU is Bosch 0281011701
9BXC

Any help will be much appreciated.
Thank you very much.

Documents.zip
File Type:
Downloaded:	4 times
Size:	7.03 MB

]]> http://www.auto-professionals.co.uk/showthread.php?tid=24132 Sun, 10 Sep 2023 21:44:59 +0000 http://www.auto-professionals.co.uk/showthread.php?tid=24132 Does anyone know the best way to remove from Ford Ka MK2 2011 fuse box? It protected via a steel plate with shear bolts and look like there an headache to get to. The car has a wiring fault with the front parking lights and I have narrowed the fault down to the fuse box. I need to gain access to the plugs as well.
I don't mind going out buying the correct tool if it makes my life easier. Also the dashboard is in the way of the fuse board.
Thanks in advance.
Best wishes.
James]]> Does anyone know the best way to remove from Ford Ka MK2 2011 fuse box? It protected via a steel plate with shear bolts and look like there an headache to get to. The car has a wiring fault with the front parking lights and I have narrowed the fault down to the fuse box. I need to gain access to the plugs as well.
I don't mind going out buying the correct tool if it makes my life easier. Also the dashboard is in the way of the fuse board.
Thanks in advance.
Best wishes.
James]]> http://www.auto-professionals.co.uk/showthread.php?tid=24117 Tue, 22 Aug 2023 18:35:17 +0000 http://www.auto-professionals.co.uk/showthread.php?tid=24117

I have some problem with Fiesta 1.6L Duratorq DI SOHC (95 PS).
DTC is P132B - ECM turbocharger performance signal amplitude too high.
The solenoid valves are new! One is near the starter battery and the other rear motor
also new! The vacuum line are okay!

VIN: WF0GXXGAJGAT20077 from 05.2010.

Who can help?
Thank you in advance ]]>

I have some problem with Fiesta 1.6L Duratorq DI SOHC (95 PS).
DTC is P132B - ECM turbocharger performance signal amplitude too high.
The solenoid valves are new! One is near the starter battery and the other rear motor
also new! The vacuum line are okay!

VIN: WF0GXXGAJGAT20077 from 05.2010.

Who can help?
Thank you in advance ]]> http://www.auto-professionals.co.uk/showthread.php?tid=24109 Thu, 03 Aug 2023 17:36:49 +0000 http://www.auto-professionals.co.uk/showthread.php?tid=24109 Has anyone managed to change the speed limiter so far?
I tried from IC but did not work, the was any option to remove speed limiter but it doesn't work, it keeps crashing.
I have even downloads as build, it didn't work.
Any suggestion or ideas?
Thanks in advance.]]> Has anyone managed to change the speed limiter so far?
I tried from IC but did not work, the was any option to remove speed limiter but it doesn't work, it keeps crashing.
I have even downloads as build, it didn't work.
Any suggestion or ideas?
Thanks in advance.]]> http://www.auto-professionals.co.uk/showthread.php?tid=24013 Thu, 09 Mar 2023 16:00:44 +0000 http://www.auto-professionals.co.uk/showthread.php?tid=24013
My sons bought a 2019 Ford Focus ST Line and we want to retrofit rear parking sensors. It’s a 1.0 Lt. 125bhp MK4.
It was an option for this year of car, but not one that was chosen by the original purchaser of the vehicle.
I’m wondering if anybody has access to a newer Ford parts catalogue that could provide a diagram of the wiring loom layouts with relevant part numbers?

Many thanks.]]>
My sons bought a 2019 Ford Focus ST Line and we want to retrofit rear parking sensors. It’s a 1.0 Lt. 125bhp MK4.
It was an option for this year of car, but not one that was chosen by the original purchaser of the vehicle.
I’m wondering if anybody has access to a newer Ford parts catalogue that could provide a diagram of the wiring loom layouts with relevant part numbers?

Many thanks.]]> http://www.auto-professionals.co.uk/showthread.php?tid=23965 Wed, 04 Jan 2023 09:37:03 +0000 http://www.auto-professionals.co.uk/showthread.php?tid=23965 How can I unlock the starter?]]> How can I unlock the starter?]]> http://www.auto-professionals.co.uk/showthread.php?tid=23961 Wed, 28 Dec 2022 22:52:53 +0000 http://www.auto-professionals.co.uk/showthread.php?tid=23961 I have trouble with my wife's Ford Focus 2011 1.6 TDCI T1DB regarding hill assist unavailable ect random ABS and traction control light, and loss random of the speedo briefly, but rev counter was fine. So Wurth WoW pointed me to the left wheel speed sensor short to ground, after scan with it, i also had faults relating to offset limits or something along those lines for all 4 injectors, car was running nice though, idling as normal little low on mpg, but otherwise running very well.
I cleared those codes and upon starting the car i get lump idle and slight injector knock now and not sounding as normal. What is the process of relearning the injectors? I once had this trouble a long while back after doing the same type of thing with Forscan, and had to relearn the injectors using IDS whilst driving,
but cannot remember now the process.
Any advice would be very much appreciated.

Is it done in IDS by going, Powertrain/Service functions/ECM/reset the fuel injector then learned vales and follow a sequence whilst driving following IDS prompts?

Best regards.]]> I have trouble with my wife's Ford Focus 2011 1.6 TDCI T1DB regarding hill assist unavailable ect random ABS and traction control light, and loss random of the speedo briefly, but rev counter was fine. So Wurth WoW pointed me to the left wheel speed sensor short to ground, after scan with it, i also had faults relating to offset limits or something along those lines for all 4 injectors, car was running nice though, idling as normal little low on mpg, but otherwise running very well.
I cleared those codes and upon starting the car i get lump idle and slight injector knock now and not sounding as normal. What is the process of relearning the injectors? I once had this trouble a long while back after doing the same type of thing with Forscan, and had to relearn the injectors using IDS whilst driving,
but cannot remember now the process.
Any advice would be very much appreciated.

Is it done in IDS by going, Powertrain/Service functions/ECM/reset the fuel injector then learned vales and follow a sequence whilst driving following IDS prompts?

Best regards.]]> http://www.auto-professionals.co.uk/showthread.php?tid=23891 Fri, 16 Sep 2022 19:38:44 +0000 http://www.auto-professionals.co.uk/showthread.php?tid=23891
Is there any possibility to get correct calibration/vbf file for ECM according to VIN?
I don't have online access and I need to program used ECU. Old ECU is completely dead. I have HW to do it ok.
It's for Ford Transit Custom 2014, 2.2L 92KW.

Thank you.
Regards
Jari]]>
Is there any possibility to get correct calibration/vbf file for ECM according to VIN?
I don't have online access and I need to program used ECU. Old ECU is completely dead. I have HW to do it ok.
It's for Ford Transit Custom 2014, 2.2L 92KW.

Thank you.
Regards
Jari]]> http://www.auto-professionals.co.uk/showthread.php?tid=23878 Fri, 02 Sep 2022 11:50:06 +0000 http://www.auto-professionals.co.uk/showthread.php?tid=23878 I work on Escape 2016. It had DRL in H7 bulb. I did not backup configuration and now have a mess.

I would like to have:
0- position all off
1- position (position led lamps)
2- H7 light and LED position
3- (AUTO POSITION) in day dimmed H7 light and at dawn then brighter H7 light

Anyone can help with configuration?]]> I work on Escape 2016. It had DRL in H7 bulb. I did not backup configuration and now have a mess.

I would like to have:
0- position all off
1- position (position led lamps)
2- H7 light and LED position
3- (AUTO POSITION) in day dimmed H7 light and at dawn then brighter H7 light

Anyone can help with configuration?]]> http://www.auto-professionals.co.uk/showthread.php?tid=23763 Fri, 06 May 2022 19:32:12 +0000 http://www.auto-professionals.co.uk/showthread.php?tid=23763
Ford Focus 2.0
VIN: MPB2XXMXB2EM76839

I have this vehicle towed into the workshop, according to the customer the original ECU is lost.
He has supplied me a new ECU. What is the procedure in programming a new ECU?
I have FORscan and Original VCM II. Is this a dealer only job?

Regards.]]>
Ford Focus 2.0
VIN: MPB2XXMXB2EM76839

I have this vehicle towed into the workshop, according to the customer the original ECU is lost.
He has supplied me a new ECU. What is the procedure in programming a new ECU?
I have FORscan and Original VCM II. Is this a dealer only job?

Regards.]]> http://www.auto-professionals.co.uk/showthread.php?tid=23736 Sun, 27 Mar 2022 10:19:43 +0000 http://www.auto-professionals.co.uk/showthread.php?tid=23736 Has anyone seen this before or have a proper wiring diagram?]]> Has anyone seen this before or have a proper wiring diagram?]]> http://www.auto-professionals.co.uk/showthread.php?tid=23728 Wed, 23 Mar 2022 17:32:50 +0000 http://www.auto-professionals.co.uk/showthread.php?tid=23728
VIN:WF0KXXGCBKEM27441
ENG: EM27441

I am working on this Ford Focus ST 2.0 2014.
I have an issue with the accelerator pedal, the ECU does not display any actual data movement when the accelerator is depressed.
I will really appreciate if someone can assist with a wiring diagram.
I will post the fault codes tomorrow.

Regards.]]>
VIN:WF0KXXGCBKEM27441
ENG: EM27441

I am working on this Ford Focus ST 2.0 2014.
I have an issue with the accelerator pedal, the ECU does not display any actual data movement when the accelerator is depressed.
I will really appreciate if someone can assist with a wiring diagram.
I will post the fault codes tomorrow.

Regards.]]> http://www.auto-professionals.co.uk/showthread.php?tid=23688 Wed, 16 Feb 2022 01:40:27 +0000 http://www.auto-professionals.co.uk/showthread.php?tid=23688
I had a 2021 Transit to turn on DRL (USA to Canada conversion), but unfortunately, the usual way I was using with IDS is nowhere to be found in FDRS. (Programmable parameter > Lightning > DRL > Enable) only Automatic configuration was found.

I used ForScan to read configuration from IPC and BCM, but after a few tries, I was nowhere to be close to a good solution.
Headlamp needs to be turned on when in drive (you can't turned them off, illegal) and now it will only activate DRL when lamp switch is in Auto mode.

Someone can help?

Pictures.part1.rar
File Type:
Downloaded:	1 times
Size:	5 MB

Pictures.part2.rar
File Type:
Downloaded:	0 times
Size:	5 MB

Pictures.part3.rar
File Type:
Downloaded:	0 times
Size:	5 MB

Pictures.part4.rar
File Type:
Downloaded:	0 times
Size:	5 MB

Pictures.part5.rar
File Type:
Downloaded:	0 times
Size:	3.27 MB

]]>
I had a 2021 Transit to turn on DRL (USA to Canada conversion), but unfortunately, the usual way I was using with IDS is nowhere to be found in FDRS. (Programmable parameter > Lightning > DRL > Enable) only Automatic configuration was found.

I used ForScan to read configuration from IPC and BCM, but after a few tries, I was nowhere to be close to a good solution.
Headlamp needs to be turned on when in drive (you can't turned them off, illegal) and now it will only activate DRL when lamp switch is in Auto mode.

Someone can help?

Pictures.part1.rar
File Type:
Downloaded:	1 times
Size:	5 MB

Pictures.part2.rar
File Type:
Downloaded:	0 times
Size:	5 MB

Pictures.part3.rar
File Type:
Downloaded:	0 times
Size:	5 MB

Pictures.part4.rar
File Type:
Downloaded:	0 times
Size:	5 MB

Pictures.part5.rar
File Type:
Downloaded:	0 times
Size:	3.27 MB

]]> http://www.auto-professionals.co.uk/showthread.php?tid=23638 Fri, 17 Dec 2021 13:14:29 +0000 http://www.auto-professionals.co.uk/showthread.php?tid=23638
Some could help me to get a wiring diagram PDC from a Ford Fiesta year 2008?
It contains Park Distance Control at front and the back original from the factory

VIN: WF0JXXGAJJBS37402

Thanks in advance!]]>
Some could help me to get a wiring diagram PDC from a Ford Fiesta year 2008?
It contains Park Distance Control at front and the back original from the factory

VIN: WF0JXXGAJJBS37402

Thanks in advance!]]> http://www.auto-professionals.co.uk/showthread.php?tid=23630 Fri, 10 Dec 2021 13:57:45 +0000 http://www.auto-professionals.co.uk/showthread.php?tid=23630 Trying to program a used BCM to a 2009 Mondeo Keyless. Old BCM has water damage. Using IDS, selected 'module installation' and followed procedure OK.
When asked to swap part, as soon as I connect used BCM it trips the alarm, no ignition etc. Can a used BCM be programmed on these or must it be new only?
Thanks for any info.]]> Trying to program a used BCM to a 2009 Mondeo Keyless. Old BCM has water damage. Using IDS, selected 'module installation' and followed procedure OK.
When asked to swap part, as soon as I connect used BCM it trips the alarm, no ignition etc. Can a used BCM be programmed on these or must it be new only?
Thanks for any info.]]> http://www.auto-professionals.co.uk/showthread.php?tid=23567 Wed, 13 Oct 2021 19:30:50 +0000 http://www.auto-professionals.co.uk/showthread.php?tid=23567 VIN: WF0TXXTTPT8D75921
Engine code R2PA
UK RHD
1.8 Diesel

Hi,
Does anyone know the ohms value of the metering valve and the diesel control valve?
I believe it a Siemens diesel pump. The problem i am getting it's a non start, it was coming up with a cam sensor fault:
P0341 - Camshaft position sensor A circuit range performance bank 1 or signal sensor.
Also getting this fault: P0563 - System voltage high, and P0626 - Generator field terminal circuit high.

I was getting battery voltage on the signal wire of the cam sensor, it was fluctuating from 13.5V to 14.5V, if you unplug the 2x pump wires orange connector and white connector the fault goes away and goes to where it should be. I have even sniped the wire at the ECU multi plug to rule it even tho i done a continuity test, i could find no shorts.

The metering valve ohms reading i'm getting 2.2 Ohms unplugged and the control valve i'm getting 2.5 Ohms unplugged.
Both wires give me battery voltage unplugged, both control wires 1 gives me 3.5V and the other gives me 3.7V, i have unplugged the alternator just in case
i suspect the ECU at fault.

Has anyone got wiring diagram for the diesel fuel pump?

Best regards
James]]> VIN: WF0TXXTTPT8D75921
Engine code R2PA
UK RHD
1.8 Diesel

Hi,
Does anyone know the ohms value of the metering valve and the diesel control valve?
I believe it a Siemens diesel pump. The problem i am getting it's a non start, it was coming up with a cam sensor fault:
P0341 - Camshaft position sensor A circuit range performance bank 1 or signal sensor.
Also getting this fault: P0563 - System voltage high, and P0626 - Generator field terminal circuit high.

I was getting battery voltage on the signal wire of the cam sensor, it was fluctuating from 13.5V to 14.5V, if you unplug the 2x pump wires orange connector and white connector the fault goes away and goes to where it should be. I have even sniped the wire at the ECU multi plug to rule it even tho i done a continuity test, i could find no shorts.

The metering valve ohms reading i'm getting 2.2 Ohms unplugged and the control valve i'm getting 2.5 Ohms unplugged.
Both wires give me battery voltage unplugged, both control wires 1 gives me 3.5V and the other gives me 3.7V, i have unplugged the alternator just in case
i suspect the ECU at fault.

Has anyone got wiring diagram for the diesel fuel pump?

Best regards
James]]> http://www.auto-professionals.co.uk/showthread.php?tid=23486 Sun, 11 Jul 2021 12:05:56 +0000 http://www.auto-professionals.co.uk/showthread.php?tid=23486 Can someone please help me with a Ford Transit 2011 2.2 van and fault code B1206? How to rest it please?
Below is the scan copy.
Van not starting.
Thanks in advance.

fordtransit2.2.txt
File Type:
Downloaded:	11 times
Size:	1.07 KB

]]> Can someone please help me with a Ford Transit 2011 2.2 van and fault code B1206? How to rest it please?
Below is the scan copy.
Van not starting.
Thanks in advance.

fordtransit2.2.txt
File Type:
Downloaded:	11 times
Size:	1.07 KB

]]> http://www.auto-professionals.co.uk/showthread.php?tid=23456 Tue, 08 Jun 2021 19:50:11 +0000 http://www.auto-professionals.co.uk/showthread.php?tid=23456
Maybe some can give me advise.
Client ask me if possible to build in after an original camera at the back.
I know maybe must make cables etc.

Question 1: The sync 3 has an in connection for to connect the cables from the camera ?

Question 2: Possible to find in configuration that can vink "on" the the car has an rear view camera? (so can see at the screen)?

The car is at moment not here... it is on a college garage.

I am having Ford IDS and FDRS valid systems and of course the VCM II tool (original) wich i using for all Ford's.

Thank you in advance.
Regards PAB]]>
Maybe some can give me advise.
Client ask me if possible to build in after an original camera at the back.
I know maybe must make cables etc.

Question 1: The sync 3 has an in connection for to connect the cables from the camera ?

Question 2: Possible to find in configuration that can vink "on" the the car has an rear view camera? (so can see at the screen)?

The car is at moment not here... it is on a college garage.

I am having Ford IDS and FDRS valid systems and of course the VCM II tool (original) wich i using for all Ford's.

Thank you in advance.
Regards PAB]]>