http://www.auto-professionals.co.uk/ Sat, 30 May 2026 11:52:17 +0000 MyBB http://www.auto-professionals.co.uk/showthread.php?tid=24130 Fri, 08 Sep 2023 16:41:20 +0000 http://www.auto-professionals.co.uk/showthread.php?tid=24130
Someone experience with Harley Delphi ECU and has a mappack?
At first i want decrease the idle RPM, at the moment it is 1050, second, I want to reduce the RPM on cold starts, goes to 1800.
Or has someone the factor for engine speed? Is it like VAG Delphi ECUs 0,25?

What must i choose in WinOLS hili or lohi for locking for the idle speed? In lohi i found 1056.

Thanks.

Harley-Davidson_Sportster_models_2013_883_51_hp_Delphi_HD2-CAN_OBD_NR .rar
File Type:
Downloaded:	1 times
Size:	3.58 KB

]]>
Someone experience with Harley Delphi ECU and has a mappack?
At first i want decrease the idle RPM, at the moment it is 1050, second, I want to reduce the RPM on cold starts, goes to 1800.
Or has someone the factor for engine speed? Is it like VAG Delphi ECUs 0,25?

What must i choose in WinOLS hili or lohi for locking for the idle speed? In lohi i found 1056.

Thanks.

Harley-Davidson_Sportster_models_2013_883_51_hp_Delphi_HD2-CAN_OBD_NR .rar
File Type:
Downloaded:	1 times
Size:	3.58 KB

]]> http://www.auto-professionals.co.uk/showthread.php?tid=23974 Sat, 21 Jan 2023 19:32:10 +0000 http://www.auto-professionals.co.uk/showthread.php?tid=23974 Have 2.5 bar and scooter starts cold very hard.]]> Have 2.5 bar and scooter starts cold very hard.]]> http://www.auto-professionals.co.uk/showthread.php?tid=23422 Tue, 18 May 2021 15:25:13 +0000 http://www.auto-professionals.co.uk/showthread.php?tid=23422 I am usually not diagnosing bikes, but a good customer of mine asked for a favor...
His friend left him a 2007 Yamaha R1 with no RPM. As I understood, Yamaha already tried a used cluster, with no change.

I will go there this afternoon to take a look, but I have no idea how to talk to those bike.

There is a 3 or 4 pins connector somewhere to connect to a scan tool?
If so, I guess it will be K-Line and I can by-pass this into pin 7 of an OBD connector and use EOBD generic mode to talk to the ECM?

Any info on connection to a scan tool would be appreciated.
Also, is this a common problem to have no RPM in dash on those?
Customer told me he had wiring diagram for the bike, so I guess if it is a simple tach output from the coil or similar, it will be straight forward diagnostic...
But if it is not the case, talking to the bike might be of some help I guess...
Let me know what you guys think!

Thanks for the input guys! ]]> I am usually not diagnosing bikes, but a good customer of mine asked for a favor...
His friend left him a 2007 Yamaha R1 with no RPM. As I understood, Yamaha already tried a used cluster, with no change.

I will go there this afternoon to take a look, but I have no idea how to talk to those bike.

There is a 3 or 4 pins connector somewhere to connect to a scan tool?
If so, I guess it will be K-Line and I can by-pass this into pin 7 of an OBD connector and use EOBD generic mode to talk to the ECM?

Any info on connection to a scan tool would be appreciated.
Also, is this a common problem to have no RPM in dash on those?
Customer told me he had wiring diagram for the bike, so I guess if it is a simple tach output from the coil or similar, it will be straight forward diagnostic...
But if it is not the case, talking to the bike might be of some help I guess...
Let me know what you guys think!

Thanks for the input guys! ]]> http://www.auto-professionals.co.uk/showthread.php?tid=22833 Thu, 19 Mar 2020 16:51:58 +0000 http://www.auto-professionals.co.uk/showthread.php?tid=22833 How are you doing in these days that we are attacked by Covid-19?

I have a Honda motorbike that the key has lost.
The owner did cut the key but we need to program transponder.
Please which kind of memory will I have to read to program transponder?
What tool can do this? If this can't be done please can I turn immo off?
I am posting number from ECU.
What memory should I read to turn immo off?

Thank you very much.]]> How are you doing in these days that we are attacked by Covid-19?

I have a Honda motorbike that the key has lost.
The owner did cut the key but we need to program transponder.
Please which kind of memory will I have to read to program transponder?
What tool can do this? If this can't be done please can I turn immo off?
I am posting number from ECU.
What memory should I read to turn immo off?

Thank you very much.]]> http://www.auto-professionals.co.uk/showthread.php?tid=21894 Tue, 29 Jan 2019 12:57:02 +0000 http://www.auto-professionals.co.uk/showthread.php?tid=21894 Need a Immo off for this file.
Maybe a member can help me?
Many thanks.

[attachment=38806]]]> Need a Immo off for this file.
Maybe a member can help me?
Many thanks.

[attachment=38806]]]> http://www.auto-professionals.co.uk/showthread.php?tid=21814 Thu, 27 Dec 2018 19:06:05 +0000 http://www.auto-professionals.co.uk/showthread.php?tid=21814 I'm a little bit confused, i have two bikes:
BMW R1200GS - 2011
BMW R1200GS - 2014
I want to delete oil inspection only. How to do this in the best way?
What software and hardware is the best for this?
Thanks for any help. ]]> I'm a little bit confused, i have two bikes:
BMW R1200GS - 2011
BMW R1200GS - 2014
I want to delete oil inspection only. How to do this in the best way?
What software and hardware is the best for this?
Thanks for any help. ]]> http://www.auto-professionals.co.uk/showthread.php?tid=20992 Tue, 10 Apr 2018 11:35:18 +0000 http://www.auto-professionals.co.uk/showthread.php?tid=20992 Need help please to added key data to this dump for Kawasaki Z800 with Denso ECU 21175-0806.
This ECU have broken chip 93C86, so i replace one from Microchip 93C86 and Dump from other ECU Denso.
Used 4D60 precoded with Tagkeytool for Kawasaki Bike 4D62 and lock secret byte to 4b48494350 in Page 4.

P1: FF
P2: 05
P3: 47 b2 d5 0c
P4: 4b 48 49 43 50

Thanks for help.

93c86 x16 ori.rar
File Type:
Downloaded:	1 times
Size:	370 bytes

]]> Need help please to added key data to this dump for Kawasaki Z800 with Denso ECU 21175-0806.
This ECU have broken chip 93C86, so i replace one from Microchip 93C86 and Dump from other ECU Denso.
Used 4D60 precoded with Tagkeytool for Kawasaki Bike 4D62 and lock secret byte to 4b48494350 in Page 4.

P1: FF
P2: 05
P3: 47 b2 d5 0c
P4: 4b 48 49 43 50

Thanks for help.

93c86 x16 ori.rar
File Type:
Downloaded:	1 times
Size:	370 bytes

]]> http://www.auto-professionals.co.uk/showthread.php?tid=20865 Thu, 08 Mar 2018 00:48:02 +0000 http://www.auto-professionals.co.uk/showthread.php?tid=20865 Brought my self a Suzuki Bandit. Got an intermittent issue with it. It only done it a couple of times.
So i can start the bike with the bike on it side stand and when it in natural. I take it off it stand and it still runs.
As soon as i put it in to gear. It cuts out. I can assure you I'm not stalling it as it will do it about 3 to 4 times in a row.
I can only assume there must be some kind of switch.
Thanks in advance.
Best regards.
Jay]]> Brought my self a Suzuki Bandit. Got an intermittent issue with it. It only done it a couple of times.
So i can start the bike with the bike on it side stand and when it in natural. I take it off it stand and it still runs.
As soon as i put it in to gear. It cuts out. I can assure you I'm not stalling it as it will do it about 3 to 4 times in a row.
I can only assume there must be some kind of switch.
Thanks in advance.
Best regards.
Jay]]> http://www.auto-professionals.co.uk/showthread.php?tid=19980 Sun, 16 Jul 2017 19:19:36 +0000 http://www.auto-professionals.co.uk/showthread.php?tid=19980
I brought a Honda Superdream CB125T few weeks ago. The front forks are leaking oil as the seals have been damaged by the pitty. I've had a brain storm, is to deber it with 1500 grit paper with wd40 and then degrease it and use chemical metal to fill in the pits then spin them up on a lathe and use 1500 grit paper to make a nice smooth finish on them. What do you think? I can't afford to have them re hard chromed up. I've heard of people using araldite but i thought i would use one better.

Best regards.
Jay]]>
I brought a Honda Superdream CB125T few weeks ago. The front forks are leaking oil as the seals have been damaged by the pitty. I've had a brain storm, is to deber it with 1500 grit paper with wd40 and then degrease it and use chemical metal to fill in the pits then spin them up on a lathe and use 1500 grit paper to make a nice smooth finish on them. What do you think? I can't afford to have them re hard chromed up. I've heard of people using araldite but i thought i would use one better.

Best regards.
Jay]]> http://www.auto-professionals.co.uk/showthread.php?tid=19284 Thu, 02 Feb 2017 20:31:22 +0000 http://www.auto-professionals.co.uk/showthread.php?tid=19284
I must do a KM and MTH correction in CAN-AM Outlander 2008 year.

KM is stored in dash and MTH is stored on ECU.

Somebody do that quad or maybe someone have some manuals from engima/dp3/dp4 or other tools that can make correction it this vechicle.

I need any info.

Regards.]]>
I must do a KM and MTH correction in CAN-AM Outlander 2008 year.

KM is stored in dash and MTH is stored on ECU.

Somebody do that quad or maybe someone have some manuals from engima/dp3/dp4 or other tools that can make correction it this vechicle.

I need any info.

Regards.]]> http://www.auto-professionals.co.uk/showthread.php?tid=17466 Mon, 14 Mar 2016 21:15:56 +0000 http://www.auto-professionals.co.uk/showthread.php?tid=17466 Can I just do this with an eeprom reader/writer and software? Sorry for my ignorance as I'm new to this.
Any advice and recommendations on equipment and software i need for this project would be grateful.
Many thanks in advance.]]> Can I just do this with an eeprom reader/writer and software? Sorry for my ignorance as I'm new to this.
Any advice and recommendations on equipment and software i need for this project would be grateful.
Many thanks in advance.]]> http://www.auto-professionals.co.uk/showthread.php?tid=16272 Wed, 23 Sep 2015 16:18:52 +0000 http://www.auto-professionals.co.uk/showthread.php?tid=16272 Could anybody help me with renew (make virgin) ECU from one Peugeot scooter?
Thanks a lot advance!

Philips Ditech(908az60a).bin.zip
File Type:
Downloaded:	0 times
Size:	709 bytes

]]> Could anybody help me with renew (make virgin) ECU from one Peugeot scooter?
Thanks a lot advance!

Philips Ditech(908az60a).bin.zip
File Type:
Downloaded:	0 times
Size:	709 bytes

]]> http://www.auto-professionals.co.uk/showthread.php?tid=16265 Tue, 22 Sep 2015 19:43:34 +0000 http://www.auto-professionals.co.uk/showthread.php?tid=16265 Please advise me what to buy? I don't know if start from some 600-750cc or just buy some big bike 900cc+
My choice is between Yamaha R6/R1, Suzuki GSXR 750/1000 or some Honda.
Which one would you recommended, and which one gives less troubles?
My budget is about 4000-4500 Euro so I don't really know what I can get for it.]]> Please advise me what to buy? I don't know if start from some 600-750cc or just buy some big bike 900cc+
My choice is between Yamaha R6/R1, Suzuki GSXR 750/1000 or some Honda.
Which one would you recommended, and which one gives less troubles?
My budget is about 4000-4500 Euro so I don't really know what I can get for it.]]> http://www.auto-professionals.co.uk/showthread.php?tid=16154 Sun, 06 Sep 2015 21:29:00 +0000 http://www.auto-professionals.co.uk/showthread.php?tid=16154 I have a problem with a Suzuki ATV King Quad 500.
It will not start no spark and the FI light blinking when you switch it on. I already change the ecm, put new fuel pump, when i switch it on you hear the fuel pump after that the FI light start blinking, also put new fuel pump relay and OT sensor check all wiring and fuses all is ok.
Anybody have a solution?
Thanks.]]> I have a problem with a Suzuki ATV King Quad 500.
It will not start no spark and the FI light blinking when you switch it on. I already change the ecm, put new fuel pump, when i switch it on you hear the fuel pump after that the FI light start blinking, also put new fuel pump relay and OT sensor check all wiring and fuses all is ok.
Anybody have a solution?
Thanks.]]> http://www.auto-professionals.co.uk/showthread.php?tid=14681 Mon, 02 Mar 2015 14:33:21 +0000 http://www.auto-professionals.co.uk/showthread.php?tid=14681
Hi all.
Anybody got details on a Vespa 125? Its a non start after idling for a while. A wiring diagram will help.
I have ordered a plug for it to start. Have a sneaking suspicion its borewashed, was wondering if they suffered common faults.
It does not do many miles.
Thanks.]]>
Hi all.
Anybody got details on a Vespa 125? Its a non start after idling for a while. A wiring diagram will help.
I have ordered a plug for it to start. Have a sneaking suspicion its borewashed, was wondering if they suffered common faults.
It does not do many miles.
Thanks.]]> http://www.auto-professionals.co.uk/showthread.php?tid=12273 Tue, 29 Jul 2014 21:05:29 +0000 http://www.auto-professionals.co.uk/showthread.php?tid=12273 Thanks in advance.]]> Thanks in advance.]]> http://www.auto-professionals.co.uk/showthread.php?tid=12102 Fri, 11 Jul 2014 11:01:03 +0000 http://www.auto-professionals.co.uk/showthread.php?tid=12102 have anybody dashboard dump Kawasaki VN900?
Thank you.]]> have anybody dashboard dump Kawasaki VN900?
Thank you.]]> http://www.auto-professionals.co.uk/showthread.php?tid=11016 Sat, 12 Apr 2014 09:43:13 +0000 http://www.auto-professionals.co.uk/showthread.php?tid=11016
Requires damp the dashboard DENSO 25031-0350.
Read (16x128 of 93C56B - C as a microchip)
PM send to my email. I look forward to your help.

Thanks to all.

2011-kawasaki-z1000-speedometer1.jpg
File Type:
Downloaded:	11 times
Size:	215.06 KB

]]>
Requires damp the dashboard DENSO 25031-0350.
Read (16x128 of 93C56B - C as a microchip)
PM send to my email. I look forward to your help.

Thanks to all.

2011-kawasaki-z1000-speedometer1.jpg
File Type:
Downloaded:	11 times
Size:	215.06 KB

]]> http://www.auto-professionals.co.uk/showthread.php?tid=10857 Fri, 04 Apr 2014 04:00:41 +0000 http://www.auto-professionals.co.uk/showthread.php?tid=10857 I tested with a bench test and works for simple "K" line diagnostics.
The first one is Aprillia. Added Ducati.
If members have other connections, it's time to add to the collection. [/hide]

Ducati K connection.pdf
File Type:
Downloaded:	17 times
Size:	96 KB

Aprilia wiring connection.jpg
File Type:
Downloaded:	26 times
Size:	96.25 KB

Cable_OBD_KTM.jpg
File Type:
Downloaded:	44 times
Size:	69.12 KB

]]> I tested with a bench test and works for simple "K" line diagnostics.
The first one is Aprillia. Added Ducati.
If members have other connections, it's time to add to the collection. [/hide]

Ducati K connection.pdf
File Type:
Downloaded:	17 times
Size:	96 KB

Aprilia wiring connection.jpg
File Type:
Downloaded:	26 times
Size:	96.25 KB

Cable_OBD_KTM.jpg
File Type:
Downloaded:	44 times
Size:	69.12 KB

]]> http://www.auto-professionals.co.uk/showthread.php?tid=10806 Tue, 01 Apr 2014 12:04:09 +0000 http://www.auto-professionals.co.uk/showthread.php?tid=10806 I have a colleague who is rebuilding a 1965 94cc Garelli Monza. Does anyone know of a source for spare parts?
In particular he needs a standard 50mm piston and small end bearing.
Thanks HMC]]> I have a colleague who is rebuilding a 1965 94cc Garelli Monza. Does anyone know of a source for spare parts?
In particular he needs a standard 50mm piston and small end bearing.
Thanks HMC]]>