http://www.auto-professionals.co.uk/ Thu, 18 Jun 2026 18:57:18 +0000 MyBB http://www.auto-professionals.co.uk/showthread.php?tid=22987 Wed, 17 Jun 2020 19:56:05 +0000 http://www.auto-professionals.co.uk/showthread.php?tid=22987
I am working on this vehicle:
Isuzu KB240 2.4 Litre Petrol, TF Series, 2004 Model Year.

The Immo line from ECU to immobilizer box was shorted out resulting with a damaged comm terminal in the ECU.
I need to Immo OFF this ECU. It is using HV240 type ECU which is mostly found in Daewoo Cars. Attached is the dump and picture of ECU label.
Please assist as this car is a rust bucket and using up valuable space in the shop!]]>
I am working on this vehicle:
Isuzu KB240 2.4 Litre Petrol, TF Series, 2004 Model Year.

The Immo line from ECU to immobilizer box was shorted out resulting with a damaged comm terminal in the ECU.
I need to Immo OFF this ECU. It is using HV240 type ECU which is mostly found in Daewoo Cars. Attached is the dump and picture of ECU label.
Please assist as this car is a rust bucket and using up valuable space in the shop!]]> http://www.auto-professionals.co.uk/showthread.php?tid=21857 Wed, 16 Jan 2019 14:20:43 +0000 http://www.auto-professionals.co.uk/showthread.php?tid=21857 Isuzu 2014 NPR8 4HK1 engine code 161954
I need for this ECU DPF, EGR & DTC's P0401, P1455 OFF.
Can someone to clear?
Thanks.
Nikos]]> Isuzu 2014 NPR8 4HK1 engine code 161954
I need for this ECU DPF, EGR & DTC's P0401, P1455 OFF.
Can someone to clear?
Thanks.
Nikos]]> http://www.auto-professionals.co.uk/showthread.php?tid=21527 Thu, 27 Sep 2018 20:03:41 +0000 http://www.auto-professionals.co.uk/showthread.php?tid=21527 then put the needles back in the wrong place, its the old style dash with needle stops so getting them in the correct place is near impossible, he got another dash from breakers with more km's on, I have located the 93c46.

A couple of questions:
Am I correct in thinking this is where the mileage is stored?
Can I read on-board with clip or is it best to remove and do I read as 8 or 16 bit?

Thanks.




]]> then put the needles back in the wrong place, its the old style dash with needle stops so getting them in the correct place is near impossible, he got another dash from breakers with more km's on, I have located the 93c46.

A couple of questions:
Am I correct in thinking this is where the mileage is stored?
Can I read on-board with clip or is it best to remove and do I read as 8 or 16 bit?

Thanks.




]]> http://www.auto-professionals.co.uk/showthread.php?tid=20698 Tue, 30 Jan 2018 00:06:31 +0000 http://www.auto-professionals.co.uk/showthread.php?tid=20698 Could someone clear crash data from the following for me?
Isuzu D-Max
Autoliv ECU 898059525Y
ST95320 eeprom

dmax crash 898059525y AS9525SG4GA56.rar
File Type:
Downloaded:	4 times
Size:	1.27 KB

]]> Could someone clear crash data from the following for me?
Isuzu D-Max
Autoliv ECU 898059525Y
ST95320 eeprom

dmax crash 898059525y AS9525SG4GA56.rar
File Type:
Downloaded:	4 times
Size:	1.27 KB

]]> http://www.auto-professionals.co.uk/showthread.php?tid=20663 Mon, 22 Jan 2018 09:12:42 +0000 http://www.auto-professionals.co.uk/showthread.php?tid=20663 Please note I don't have the Security Code.]]> Please note I don't have the Security Code.]]> http://www.auto-professionals.co.uk/showthread.php?tid=12905 Wed, 24 Sep 2014 08:38:27 +0000 http://www.auto-professionals.co.uk/showthread.php?tid=12905
I have a client with a 2010 ISUZU KB series also sold as the D-Max.
They lost all the keys. The Immo unit is a Tokai Rika. It has a 93LC66A Eeprom in the box.
The dump is herewith. Are these ID46 or 4D transponders?
What tool can make one or can somebody modify the dump with tiris info?

ISUZU 93LC66A.rar
File Type:
Downloaded:	4 times
Size:	200 bytes

]]>
I have a client with a 2010 ISUZU KB series also sold as the D-Max.
They lost all the keys. The Immo unit is a Tokai Rika. It has a 93LC66A Eeprom in the box.
The dump is herewith. Are these ID46 or 4D transponders?
What tool can make one or can somebody modify the dump with tiris info?

ISUZU 93LC66A.rar
File Type:
Downloaded:	4 times
Size:	200 bytes

]]> http://www.auto-professionals.co.uk/showthread.php?tid=11981 Tue, 01 Jul 2014 14:27:37 +0000 http://www.auto-professionals.co.uk/showthread.php?tid=11981
I have a Transtron ecu 8981520930 with 25C320E eprom.

Is there a way to make immo off or virgin or does anyone has an original file which is reset (comes with the new ecu)? Or if i know pin from this ecu, can it be programmed? Original data are all FF

Old ecu is destroyed and i need to install a used one.

Thanks in advance mates.

25C320_our.rar
File Type:
Downloaded:	3 times
Size:	566 bytes

]]>
I have a Transtron ecu 8981520930 with 25C320E eprom.

Is there a way to make immo off or virgin or does anyone has an original file which is reset (comes with the new ecu)? Or if i know pin from this ecu, can it be programmed? Original data are all FF

Old ecu is destroyed and i need to install a used one.

Thanks in advance mates.

25C320_our.rar
File Type:
Downloaded:	3 times
Size:	566 bytes

]]> http://www.auto-professionals.co.uk/showthread.php?tid=10715 Thu, 27 Mar 2014 05:09:54 +0000 http://www.auto-professionals.co.uk/showthread.php?tid=10715 http://www.auto-professionals.co.uk/showthread.php?tid=10344 Sun, 09 Mar 2014 17:39:35 +0000 http://www.auto-professionals.co.uk/showthread.php?tid=10344 I'm looking for info about reading writing Transtron Ecu of Isuzu bus, it's a 5.2 litre 4HK1 Engine.
I have K-tag clone but it seems having only 2 ecus of this type.
Does anyone know what tool can do this work with cks correction ok?
Asked a friend who have Original FgTech with Jtag and he gave .pdf of same ecu looked mine but he's too far from here, also found a pdf of Piasini that can do this ecu but don't know if clone can do the work the same.

Any info is appreciated!
Here some pics...

EasyCapture11.gif
File Type:
Downloaded:	14 times
Size:	215.47 KB

EasyCapture22.gif
File Type:
Downloaded:	7 times
Size:	100.24 KB

EasyCapture33.gif
File Type:
Downloaded:	6 times
Size:	91 KB

]]> I'm looking for info about reading writing Transtron Ecu of Isuzu bus, it's a 5.2 litre 4HK1 Engine.
I have K-tag clone but it seems having only 2 ecus of this type.
Does anyone know what tool can do this work with cks correction ok?
Asked a friend who have Original FgTech with Jtag and he gave .pdf of same ecu looked mine but he's too far from here, also found a pdf of Piasini that can do this ecu but don't know if clone can do the work the same.

Any info is appreciated!
Here some pics...

EasyCapture11.gif
File Type:
Downloaded:	14 times
Size:	215.47 KB

EasyCapture22.gif
File Type:
Downloaded:	7 times
Size:	100.24 KB

EasyCapture33.gif
File Type:
Downloaded:	6 times
Size:	91 KB

]]> http://www.auto-professionals.co.uk/showthread.php?tid=5334 Thu, 13 Jun 2013 19:05:55 +0000 http://www.auto-professionals.co.uk/showthread.php?tid=5334
Rodeo Denver 3.0 TD 2004 gearbox issue. Lost total drive had diagnostics guy come out and he said no comms with Gearbox ecu. Start the otherday went into gear and drove a short ways and then lost drive. Checked fluids etc all fine. Can anyone suggest what the problem may be?

Thanks
Gus]]>
Rodeo Denver 3.0 TD 2004 gearbox issue. Lost total drive had diagnostics guy come out and he said no comms with Gearbox ecu. Start the otherday went into gear and drove a short ways and then lost drive. Checked fluids etc all fine. Can anyone suggest what the problem may be?

Thanks
Gus]]> http://www.auto-professionals.co.uk/showthread.php?tid=3674 Fri, 05 Apr 2013 22:48:13 +0000 http://www.auto-professionals.co.uk/showthread.php?tid=3674 The procedure to be followed is:
1- Ignition off, connects the pins indicated in the drawing.
2- Ignition on and after a few seconds the LED (check 4wd) the lamp will turn off.
3- Ignition off and removed the connection between the pins.

ECUTransfer3.png
File Type:
Downloaded:	53 times
Size:	36.1 KB

]]> The procedure to be followed is:
1- Ignition off, connects the pins indicated in the drawing.
2- Ignition on and after a few seconds the LED (check 4wd) the lamp will turn off.
3- Ignition off and removed the connection between the pins.

ECUTransfer3.png
File Type:
Downloaded:	53 times
Size:	36.1 KB

]]> http://www.auto-professionals.co.uk/showthread.php?tid=901 Tue, 20 Nov 2012 20:00:07 +0000 http://www.auto-professionals.co.uk/showthread.php?tid=901 You may cancel the immobilizer of this file
ecu Isuzu Trooper 3.0 4JX1 8093760892
Thanks

ISUZU_Trooper_TD_3.0_29F200_ori.rar
File Type:
Downloaded:	22 times
Size:	69.23 KB

]]> You may cancel the immobilizer of this file
ecu Isuzu Trooper 3.0 4JX1 8093760892
Thanks

ISUZU_Trooper_TD_3.0_29F200_ori.rar
File Type:
Downloaded:	22 times
Size:	69.23 KB

]]> http://www.auto-professionals.co.uk/showthread.php?tid=438 Thu, 11 Oct 2012 14:18:50 +0000 http://www.auto-professionals.co.uk/showthread.php?tid=438
Got here a Isuzu pickup from year 2004 which has sometimes problem with immobox.
Just was wondering if it would be possible to make immo off for this car?
Looks quite the same like opel psg16 pumps (think it is the same),
Just a little hard to work on this ecu, because it's hybrid and i got no programmer to read eeprom

All information about this welcome....]]>
Got here a Isuzu pickup from year 2004 which has sometimes problem with immobox.
Just was wondering if it would be possible to make immo off for this car?
Looks quite the same like opel psg16 pumps (think it is the same),
Just a little hard to work on this ecu, because it's hybrid and i got no programmer to read eeprom

All information about this welcome....]]>