http://www.auto-professionals.co.uk/ Mon, 25 May 2026 23:34:37 +0000 MyBB http://www.auto-professionals.co.uk/showthread.php?tid=24156 Sun, 29 Oct 2023 15:01:39 +0000 http://www.auto-professionals.co.uk/showthread.php?tid=24156 I need some help please.
I'm a repair mechanic.

Scania Truck (South America)
Model = P-320
Year = 2019
VIN = 9BSP8X200K3956596

Scania P-320 with a problem with the electronic master key, does not start, does not work, 24V power supply is off.
Battery is 24V, all good and new.
The master key button is in the "ON" position but the system refuses to start the truck, no voltage appears in the truck circuit.
This truck model has an electronic battery charging system, I still don't understand how this works, the relays connect contacts, but do not release the 24V battery voltage.
I need the electrical diagram of the batteries and control unit (electronic master key).

Any help please?]]> I need some help please.
I'm a repair mechanic.

Scania Truck (South America)
Model = P-320
Year = 2019
VIN = 9BSP8X200K3956596

Scania P-320 with a problem with the electronic master key, does not start, does not work, 24V power supply is off.
Battery is 24V, all good and new.
The master key button is in the "ON" position but the system refuses to start the truck, no voltage appears in the truck circuit.
This truck model has an electronic battery charging system, I still don't understand how this works, the relays connect contacts, but do not release the 24V battery voltage.
I need the electrical diagram of the batteries and control unit (electronic master key).

Any help please?]]> http://www.auto-professionals.co.uk/showthread.php?tid=24140 Sat, 30 Sep 2023 15:35:25 +0000 http://www.auto-professionals.co.uk/showthread.php?tid=24140 I'm mechanical auto repair.

Scania G-420
Year = 2012
Engine = 6 cylinders
Fuel injection = EMS-6.2

Problem: I have an intermittent problem on a truck belonging to my client.
When the truck arrives on a road with a strong climb, the engine shows cuts, strong jerks.
The defect only occurs in mountains, driving with maximum load ,on flat roads everything is normal.

On the diagnostic scan tool, no fault codes found!
Replaced all oil filters.

Some ideas?
Thanks.]]> I'm mechanical auto repair.

Scania G-420
Year = 2012
Engine = 6 cylinders
Fuel injection = EMS-6.2

Problem: I have an intermittent problem on a truck belonging to my client.
When the truck arrives on a road with a strong climb, the engine shows cuts, strong jerks.
The defect only occurs in mountains, driving with maximum load ,on flat roads everything is normal.

On the diagnostic scan tool, no fault codes found!
Replaced all oil filters.

Some ideas?
Thanks.]]> http://www.auto-professionals.co.uk/showthread.php?tid=22943 Wed, 27 May 2020 05:03:54 +0000 http://www.auto-professionals.co.uk/showthread.php?tid=22943 I am looking for a full backup file for a Scania P440 EMS S7 DC1310 read by K-Tag or KTM100.
Regards.]]> I am looking for a full backup file for a Scania P440 EMS S7 DC1310 read by K-Tag or KTM100.
Regards.]]> http://www.auto-professionals.co.uk/showthread.php?tid=19357 Wed, 15 Feb 2017 11:49:37 +0000 http://www.auto-professionals.co.uk/showthread.php?tid=19357 Can anyone of you tell me how to immo off a Scania R620 year 2005?
Do I have to do anything inside COO or EMS?
Regards.]]> Can anyone of you tell me how to immo off a Scania R620 year 2005?
Do I have to do anything inside COO or EMS?
Regards.]]> http://www.auto-professionals.co.uk/showthread.php?tid=5956 Wed, 24 Jul 2013 13:23:28 +0000 http://www.auto-professionals.co.uk/showthread.php?tid=5956 Scania TYPE r124GA4X2NZ380]]> Scania TYPE r124GA4X2NZ380]]> http://www.auto-professionals.co.uk/showthread.php?tid=5465 Thu, 20 Jun 2013 22:38:48 +0000 http://www.auto-professionals.co.uk/showthread.php?tid=5465 I have a strange problem with a truck Scania 114 model 2000.
First time i scan DTC codes with Delphi truck diagnostic
(downloaded from here version 2012.3, i use two h/w, old and new VCI both)
then I'm try to calibrate air suspension, i follow exactly all "how to" helps from Delphi info...
Finished calibration successfully but after that i have one code (3, wrong parameters stored).
I delete errors successful but 3th axle not working and the same error appears again (axle light blinking in the dash).
I have confused, what is wrong? Before first calibration all work fine.
Thanks in advance for any help.]]> I have a strange problem with a truck Scania 114 model 2000.
First time i scan DTC codes with Delphi truck diagnostic
(downloaded from here version 2012.3, i use two h/w, old and new VCI both)
then I'm try to calibrate air suspension, i follow exactly all "how to" helps from Delphi info...
Finished calibration successfully but after that i have one code (3, wrong parameters stored).
I delete errors successful but 3th axle not working and the same error appears again (axle light blinking in the dash).
I have confused, what is wrong? Before first calibration all work fine.
Thanks in advance for any help.]]>