<![CDATA[Auto-Professionals - Saab]]> http://www.auto-professionals.co.uk/ Wed, 29 Apr 2026 22:07:13 +0000 MyBB <![CDATA[Saab 9-3 2005 AirBag Issue]]> http://www.auto-professionals.co.uk/showthread.php?tid=21934 Thu, 07 Feb 2019 09:17:35 +0000 http://www.auto-professionals.co.uk/showthread.php?tid=21934
I have a Saab 9-3 year 2005 AirBag light on.
I have code read with OP-COM and got code B0103-08 code unknown.
Can anyone point me in direction had little look on Google but not found anything.

Many thanks.
Tony]]>
I have a Saab 9-3 year 2005 AirBag light on.
I have code read with OP-COM and got code B0103-08 code unknown.
Can anyone point me in direction had little look on Google but not found anything.

Many thanks.
Tony]]> <![CDATA[Saab 9-3 2007 CIM Virgin Dump File]]> http://www.auto-professionals.co.uk/showthread.php?tid=21688 Tue, 13 Nov 2018 17:17:09 +0000 http://www.auto-professionals.co.uk/showthread.php?tid=21688 Does anyone have for 2007 Saab 9-3 virgin CIM file with no steering angle sensor?
Thanks.]]> Does anyone have for 2007 Saab 9-3 virgin CIM file with no steering angle sensor?
Thanks.]]> <![CDATA[Saab 9-3 2003 Steering Lock Issue]]> http://www.auto-professionals.co.uk/showthread.php?tid=20635 Mon, 15 Jan 2018 11:40:12 +0000 http://www.auto-professionals.co.uk/showthread.php?tid=20635
OK, Saab 9-3 2003 Areo.
Dash Display came up with steering lock fail key would not turn on.
Plugged Delphi Diagnostics in and read loads of codes and there is a test wear you can activate the steering lock to remove a stuck key did this car was OK for 5 mins the flagged up the steering lock sign I replaced the ignition housing unit with a known good one and yet again car was OK for 5 or 10 minutes the fail on the display steering lock so I am now gonna replace the steering lock unit squire box what i need to no can I swap the data from one to the other as i will be using a used unit.
Then if this fails i be looking to swap the CIM I suppose.]]>
OK, Saab 9-3 2003 Areo.
Dash Display came up with steering lock fail key would not turn on.
Plugged Delphi Diagnostics in and read loads of codes and there is a test wear you can activate the steering lock to remove a stuck key did this car was OK for 5 mins the flagged up the steering lock sign I replaced the ignition housing unit with a known good one and yet again car was OK for 5 or 10 minutes the fail on the display steering lock so I am now gonna replace the steering lock unit squire box what i need to no can I swap the data from one to the other as i will be using a used unit.
Then if this fails i be looking to swap the CIM I suppose.]]> <![CDATA[Saab 9-5 2.2 PSG16 Pump Install]]> http://www.auto-professionals.co.uk/showthread.php?tid=19812 Sun, 04 Jun 2017 12:42:09 +0000 http://www.auto-professionals.co.uk/showthread.php?tid=19812 Opel should be placed on the Saab 9-5 2.2. What is the procedure?]]> Opel should be placed on the Saab 9-5 2.2. What is the procedure?]]> <![CDATA[Saab 9-3 2004 AirBag Crash Data Clear [SOLVED!]]]> http://www.auto-professionals.co.uk/showthread.php?tid=18035 Tue, 07 Jun 2016 16:08:02 +0000 http://www.auto-professionals.co.uk/showthread.php?tid=18035 ECU info 12802582 903860.
saab 93.rar
File Type: .rar
Downloaded: 4 times
Size: 1.02 KB

]]> ECU info 12802582 903860.
saab 93.rar
File Type: .rar
Downloaded: 4 times
Size: 1.02 KB

]]> <![CDATA[Saab 9-5 PIN Code From CIM Dump]]> http://www.auto-professionals.co.uk/showthread.php?tid=17699 Fri, 15 Apr 2016 15:43:22 +0000 http://www.auto-professionals.co.uk/showthread.php?tid=17699 Can you help me anyone? I need pin code from Saab 9-5D column module CIM.
I posting here the file 93c66 8pin SMD.
You can calculate for me?
Thank you!
saab93c66.rar
File Type: .rar
Downloaded: 8 times
Size: 394 bytes

]]> Can you help me anyone? I need pin code from Saab 9-5D column module CIM.
I posting here the file 93c66 8pin SMD.
You can calculate for me?
Thank you!
saab93c66.rar
File Type: .rar
Downloaded: 8 times
Size: 394 bytes

]]> <![CDATA[Saab 9-3 2008 Key Programming Procedure]]> http://www.auto-professionals.co.uk/showthread.php?tid=17098 Thu, 21 Jan 2016 19:35:32 +0000 http://www.auto-professionals.co.uk/showthread.php?tid=17098 Regards.
Mike]]> Regards.
Mike]]> <![CDATA[Saab 9-3 2005 1.9 TDi Immo Fault [SOLVED!]]]> http://www.auto-professionals.co.uk/showthread.php?tid=16423 Wed, 14 Oct 2015 17:33:36 +0000 http://www.auto-professionals.co.uk/showthread.php?tid=16423
I have problem with Saab 9-3 1.9 TDi 2005 year immo. sadsmile2 I read CIM and know pin, and tried enter code with OP-COM, AVDI, Tech2, but not accept. sadsmile2
Says that code not accepted and i don't understand with what tool i can enter code and relearn immo?
I rewrite Saab GlobalTIS, but nothing, same not accept code.

I putting here CIM eeprom, you can look pin code is good MPP3.

Maybe some one can explain me in pm ore in Skype how need recode immo for Saab because, with Opel i don't have problem read pin and reprogram immo.
But with Saab this for me is..... sadsmile2

Thank you all for any help.
cim 93LC66A 8bit original.rar
File Type: .rar
Downloaded: 4 times
Size: 414 bytes


cim 93LC66A 16bit original.rar
File Type: .rar
Downloaded: 1 times
Size: 490 bytes

]]>
I have problem with Saab 9-3 1.9 TDi 2005 year immo. sadsmile2 I read CIM and know pin, and tried enter code with OP-COM, AVDI, Tech2, but not accept. sadsmile2
Says that code not accepted and i don't understand with what tool i can enter code and relearn immo?
I rewrite Saab GlobalTIS, but nothing, same not accept code.

I putting here CIM eeprom, you can look pin code is good MPP3.

Maybe some one can explain me in pm ore in Skype how need recode immo for Saab because, with Opel i don't have problem read pin and reprogram immo.
But with Saab this for me is..... sadsmile2

Thank you all for any help.
cim 93LC66A 8bit original.rar
File Type: .rar
Downloaded: 4 times
Size: 414 bytes


cim 93LC66A 16bit original.rar
File Type: .rar
Downloaded: 1 times
Size: 490 bytes

]]> <![CDATA[Saab 9-3 Add Key]]> http://www.auto-professionals.co.uk/showthread.php?tid=15711 Wed, 01 Jul 2015 22:30:20 +0000 http://www.auto-professionals.co.uk/showthread.php?tid=15711 I need to add a key to a later 9-3 with the pear shape key. I have no security code and no Tech2 but I have use of Abirites with full key programming. Can this machine extract the key code so I can program the new key which is genuine?
Thanks.]]> I need to add a key to a later 9-3 with the pear shape key. I have no security code and no Tech2 but I have use of Abirites with full key programming. Can this machine extract the key code so I can program the new key which is genuine?
Thanks.]]> <![CDATA[Saab 9-5 2004 Z19DTH DPF OFF]]> http://www.auto-professionals.co.uk/showthread.php?tid=14015 Mon, 29 Dec 2014 17:03:14 +0000 http://www.auto-professionals.co.uk/showthread.php?tid=14015 I need dpf off Saab 9-5 made 2004, engine Z19DTH 1.9 Diesel 16V 110kw, file read with MPPS.
Regards!
saab 93 1.rar
File Type: .rar
Downloaded: 11 times
Size: 34.5 KB

]]> I need dpf off Saab 9-5 made 2004, engine Z19DTH 1.9 Diesel 16V 110kw, file read with MPPS.
Regards!
saab 93 1.rar
File Type: .rar
Downloaded: 11 times
Size: 34.5 KB

]]> <![CDATA[Saab 9-3 CIM Virgin Dump]]> http://www.auto-professionals.co.uk/showthread.php?tid=13652 Thu, 27 Nov 2014 09:24:19 +0000 http://www.auto-professionals.co.uk/showthread.php?tid=13652
Can anyone give me a virgin dump for above vehicle without ESP?
Many thanks.]]>
Can anyone give me a virgin dump for above vehicle without ESP?
Many thanks.]]> <![CDATA[Saab 9-3 SS 2003 PCH7946 Programming]]> http://www.auto-professionals.co.uk/showthread.php?tid=11238 Mon, 28 Apr 2014 16:22:16 +0000 http://www.auto-professionals.co.uk/showthread.php?tid=11238 How to prepare an empty PCF7946 programming to understand the Tech2? Saab 93 SS 2003.
Thanks.
Best regards.]]> How to prepare an empty PCF7946 programming to understand the Tech2? Saab 93 SS 2003.
Thanks.
Best regards.]]> <![CDATA[Saab 9-5 Key ID 14 Conversion]]> http://www.auto-professionals.co.uk/showthread.php?tid=11181 Wed, 23 Apr 2014 14:19:25 +0000 http://www.auto-professionals.co.uk/showthread.php?tid=11181 Is there able and willing to help? Convert key data understandable CIWT_swap block.
Thanks to all
BR
Bllinda

P.S. Cars427, this theme does not link. Thx.]]> Is there able and willing to help? Convert key data understandable CIWT_swap block.
Thanks to all
BR
Bllinda

P.S. Cars427, this theme does not link. Thx.]]> <![CDATA[Saab 9-5 All Keys Lost]]> http://www.auto-professionals.co.uk/showthread.php?tid=11171 Tue, 22 Apr 2014 21:37:20 +0000 http://www.auto-professionals.co.uk/showthread.php?tid=11171
Regards.]]>
Regards.]]> <![CDATA[Saab 9-3 All Keys Lost]]> http://www.auto-professionals.co.uk/showthread.php?tid=11075 Wed, 16 Apr 2014 21:39:01 +0000 http://www.auto-professionals.co.uk/showthread.php?tid=11075
Regards.]]>
Regards.]]> <![CDATA[Saab 9-3 2002 2.2 Engine Problem]]> http://www.auto-professionals.co.uk/showthread.php?tid=10974 Thu, 10 Apr 2014 06:07:41 +0000 http://www.auto-professionals.co.uk/showthread.php?tid=10974
I have problem with Saab 9-3 2002 year 2.2 engine.
When customer came I checked and in engine was 2 faults.
But when i try join to Bosch in psg 16 i cant, sadsmile2 only i can join with edc16c9 ore edc17c18/19.
And when i connect to edc16c9 fault
1 - A/C compressor relay problem.
2 - EGR problem so i put emulator and fault disappear and car accelerate and working good.
edc17c18/19 when connect show faults:
1 - Engine timing angle outside specific range.
2 - EGR problem.
So i Put emulator EGR 1 fault clear but second still in car and i can't clear it.

And car cold ore hot don't working i press decelerator and car working until 2,5rpm. Some times i start a car and all working good. smile2
I checked:
1- Turbo ok
2- Vacum - ok
3- EGR ok
4- Air mass ok
5- What now?

Can anyone help me?

Thank you.]]>
I have problem with Saab 9-3 2002 year 2.2 engine.
When customer came I checked and in engine was 2 faults.
But when i try join to Bosch in psg 16 i cant, sadsmile2 only i can join with edc16c9 ore edc17c18/19.
And when i connect to edc16c9 fault
1 - A/C compressor relay problem.
2 - EGR problem so i put emulator and fault disappear and car accelerate and working good.
edc17c18/19 when connect show faults:
1 - Engine timing angle outside specific range.
2 - EGR problem.
So i Put emulator EGR 1 fault clear but second still in car and i can't clear it.

And car cold ore hot don't working i press decelerator and car working until 2,5rpm. Some times i start a car and all working good. smile2
I checked:
1- Turbo ok
2- Vacum - ok
3- EGR ok
4- Air mass ok
5- What now?

Can anyone help me?

Thank you.]]> <![CDATA[Saab 900 1994-1998 Clarion Radio System Security Codes]]> http://www.auto-professionals.co.uk/showthread.php?tid=9553 Thu, 30 Jan 2014 23:45:00 +0000 http://www.auto-professionals.co.uk/showthread.php?tid=9553
Here are the radio codes for SAAB 900 models 1994-1998 using Clarion head units.

Enjoy! bigsmile
Saab - Clarion Radio Codes.rar
File Type: .rar
Downloaded: 9 times
Size: 579.9 KB

]]>
Here are the radio codes for SAAB 900 models 1994-1998 using Clarion head units.

Enjoy! bigsmile
Saab - Clarion Radio Codes.rar
File Type: .rar
Downloaded: 9 times
Size: 579.9 KB

]]> <![CDATA[Saab 9-3 (Mileage ALGO)]]> http://www.auto-professionals.co.uk/showthread.php?tid=9266 Fri, 17 Jan 2014 11:13:39 +0000 http://www.auto-professionals.co.uk/showthread.php?tid=9266
[hide]Chip location:

[Image: saab9320032.jpg]

The value of the KM must be calculated to hex and must have a length of 6 digits,
for example:
1km = 00 00 01
10km = 00 00 0A
255km = 00 00 FF
65535km = 00 FF FF

The location where it is stored are 0x00-0x02, 0x04-0x06, 0x08-0x0A, 0x0C-0x0E

Example 65535km:

PHP Code:
----- 00 01 02 03 04 05 06 07 08 09 0A 0B 0C 0D 0E 0F
0000: 00 FF FF XX 00 FF FF XX 00 FF FF XX 00 FF FF XX
0010: 00 FF FF XX XX XX XX XX XX XX XX XX XX XX XX XX 
[/hide]

bandit]]>
[hide]Chip location:

[Image: saab9320032.jpg]

The value of the KM must be calculated to hex and must have a length of 6 digits,
for example:
1km = 00 00 01
10km = 00 00 0A
255km = 00 00 FF
65535km = 00 FF FF

The location where it is stored are 0x00-0x02, 0x04-0x06, 0x08-0x0A, 0x0C-0x0E

Example 65535km:

PHP Code:
----- 00 01 02 03 04 05 06 07 08 09 0A 0B 0C 0D 0E 0F
0000: 00 FF FF XX 00 FF FF XX 00 FF FF XX 00 FF FF XX
0010: 00 FF FF XX XX XX XX XX XX XX XX XX XX XX XX XX 
[/hide]

bandit]]> <![CDATA[Saab Bosch ME 9.6 ECU Tunning S/W]]> http://www.auto-professionals.co.uk/showthread.php?tid=8551 Thu, 19 Dec 2013 17:43:47 +0000 http://www.auto-professionals.co.uk/showthread.php?tid=8551
bigsmile]]>
bigsmile]]> <![CDATA[Saab 9-3 1998 New Key Or Immo OFF?]]> http://www.auto-professionals.co.uk/showthread.php?tid=6273 Thu, 15 Aug 2013 09:17:13 +0000 http://www.auto-professionals.co.uk/showthread.php?tid=6273
I have lost the original key or my 9-3 saab year 1998.
it runs with petrol.
i have a spare key but the ID13 transponder appears to be demagnetized.
Can someone tell me how i can make a new transponder or immo off.
These are the tools i have:
- car key master-100
- xprog-m v5
- carprog
- zedbull
- sbb

Regards.]]>
I have lost the original key or my 9-3 saab year 1998.
it runs with petrol.
i have a spare key but the ID13 transponder appears to be demagnetized.
Can someone tell me how i can make a new transponder or immo off.
These are the tools i have:
- car key master-100
- xprog-m v5
- carprog
- zedbull
- sbb

Regards.]]>