http://www.auto-professionals.co.uk/ Wed, 29 Apr 2026 22:07:15 +0000 MyBB http://www.auto-professionals.co.uk/showthread.php?tid=24310 Sun, 08 Dec 2024 07:11:06 +0000 http://www.auto-professionals.co.uk/showthread.php?tid=24310 Did anybody find an immo off solution by now for this ECU from a Land Rover 0261204901 NNN100660 M5.7.2 with a 29F200 flash?

29F200BB-OE1.rar
File Type:
Downloaded:	0 times
Size:	75.92 KB

]]> Did anybody find an immo off solution by now for this ECU from a Land Rover 0261204901 NNN100660 M5.7.2 with a 29F200 flash?

29F200BB-OE1.rar
File Type:
Downloaded:	0 times
Size:	75.92 KB

]]> http://www.auto-professionals.co.uk/showthread.php?tid=24195 Sun, 18 Feb 2024 10:25:09 +0000 http://www.auto-professionals.co.uk/showthread.php?tid=24195 Have here a Range Rover Sport V6 2.7TD and ECU was burned, only have recovery eeprom data, micro mpc is ko.
I have another ECU from donor car but i assume i cannot only swap eeprom to get car start, right?
ECU is SID204 by Siemens, i swap eeprom but car do nothing, i have something like VIN mismatch error, even the VIN is correctly seen by the diagnostic because i swap eeprom.
My question is do i need to clone all of original ECU to make car start, micro and eeprom?]]> Have here a Range Rover Sport V6 2.7TD and ECU was burned, only have recovery eeprom data, micro mpc is ko.
I have another ECU from donor car but i assume i cannot only swap eeprom to get car start, right?
ECU is SID204 by Siemens, i swap eeprom but car do nothing, i have something like VIN mismatch error, even the VIN is correctly seen by the diagnostic because i swap eeprom.
My question is do i need to clone all of original ECU to make car start, micro and eeprom?]]> http://www.auto-professionals.co.uk/showthread.php?tid=24038 Fri, 14 Apr 2023 06:46:53 +0000 http://www.auto-professionals.co.uk/showthread.php?tid=24038
ECM: 37820-P5R-G20
Car not have keys, please help for immo off or new key solved.
ECM is same like Honda?
Immo box i don't find, it's not there, i remove all plastics in car by the driver, by the passenger, behind the radio, nothing.
Back in the car I found a box that has 2 connectors, and 5 relays from Motorola 0d54J, Valeo box 35011-SN8-G which turns on the blinkers.

Can anyone help with this car?

20230413_120825.jpg
File Type:
Downloaded:	5 times
Size:	98.54 KB

rover 2.jpg
File Type:
Downloaded:	4 times
Size:	41.6 KB

3.jpg
File Type:
Downloaded:	4 times
Size:	97.7 KB

]]>
ECM: 37820-P5R-G20
Car not have keys, please help for immo off or new key solved.
ECM is same like Honda?
Immo box i don't find, it's not there, i remove all plastics in car by the driver, by the passenger, behind the radio, nothing.
Back in the car I found a box that has 2 connectors, and 5 relays from Motorola 0d54J, Valeo box 35011-SN8-G which turns on the blinkers.

Can anyone help with this car?

20230413_120825.jpg
File Type:
Downloaded:	5 times
Size:	98.54 KB

rover 2.jpg
File Type:
Downloaded:	4 times
Size:	41.6 KB

3.jpg
File Type:
Downloaded:	4 times
Size:	97.7 KB

]]> http://www.auto-professionals.co.uk/showthread.php?tid=23980 Sat, 28 Jan 2023 10:54:40 +0000 http://www.auto-professionals.co.uk/showthread.php?tid=23980
I'm looking for a correction on this file, donor dash has been fitted and original one not available to swap eeprom.
This is sitting at 055885 miles or 89938 km and i'm needing 37000 miles or 59545 km.
Tachosoft shows line 00040 to adjust but also lists 93c56 eeprom, this is a 93s56 and doesn't look like mileage on this section.

Many thanks.

rover 75 93s56 eeprom.rar
File Type:
Downloaded:	4 times
Size:	345 bytes

]]>
I'm looking for a correction on this file, donor dash has been fitted and original one not available to swap eeprom.
This is sitting at 055885 miles or 89938 km and i'm needing 37000 miles or 59545 km.
Tachosoft shows line 00040 to adjust but also lists 93c56 eeprom, this is a 93s56 and doesn't look like mileage on this section.

Many thanks.

rover 75 93s56 eeprom.rar
File Type:
Downloaded:	4 times
Size:	345 bytes

]]> http://www.auto-professionals.co.uk/showthread.php?tid=23316 Tue, 12 Jan 2021 17:58:08 +0000 http://www.auto-professionals.co.uk/showthread.php?tid=23316 Good friend of mine has 2008 Range Rover Sport but only one key fob.
Trying to save them some money or is it false economy to try this with key fob?
Can a used key fob be used (I don't think it can).
I see there is a guy on ebay claiming that he can make a used key fob a virgin fob and be programmed to any used vehicle, is this possible?
Don't want to try and save them money but brick ecus and make car un-useable.

The only tool I have here for this is Autologic, if I can use it for this?

Thank you for any help/advice.
Regards]]> Good friend of mine has 2008 Range Rover Sport but only one key fob.
Trying to save them some money or is it false economy to try this with key fob?
Can a used key fob be used (I don't think it can).
I see there is a guy on ebay claiming that he can make a used key fob a virgin fob and be programmed to any used vehicle, is this possible?
Don't want to try and save them money but brick ecus and make car un-useable.

The only tool I have here for this is Autologic, if I can use it for this?

Thank you for any help/advice.
Regards]]> http://www.auto-professionals.co.uk/showthread.php?tid=23306 Tue, 05 Jan 2021 18:50:59 +0000 http://www.auto-professionals.co.uk/showthread.php?tid=23306
[attachment=40689]]]>
[attachment=40689]]]> http://www.auto-professionals.co.uk/showthread.php?tid=23097 Tue, 18 Aug 2020 10:51:01 +0000 http://www.auto-professionals.co.uk/showthread.php?tid=23097 kindly someone help me with DPF off in this car, Evoque 2015.
I have only one DTC according to abstraction of DPF, P2463.
Thanks. ]]> kindly someone help me with DPF off in this car, Evoque 2015.
I have only one DTC according to abstraction of DPF, P2463.
Thanks. ]]> http://www.auto-professionals.co.uk/showthread.php?tid=23016 Tue, 07 Jul 2020 11:56:57 +0000 http://www.auto-professionals.co.uk/showthread.php?tid=23016 Is it possible to clone this ECU? I don't have car with me.
Thank you.

Regards
Kmpg

[attachment=40314]]]> Is it possible to clone this ECU? I don't have car with me.
Thank you.

Regards
Kmpg

[attachment=40314]]]> http://www.auto-professionals.co.uk/showthread.php?tid=22361 Mon, 05 Aug 2019 17:55:34 +0000 http://www.auto-professionals.co.uk/showthread.php?tid=22361 Please dear friends, if i read the MCU can i will turn Immo off in this kind of car by just to read this?
Does anyone of you dear friends have try to read this MCU with original CarProg?
Thank you very much.]]> Please dear friends, if i read the MCU can i will turn Immo off in this kind of car by just to read this?
Does anyone of you dear friends have try to read this MCU with original CarProg?
Thank you very much.]]> http://www.auto-professionals.co.uk/showthread.php?tid=22309 Tue, 09 Jul 2019 02:00:00 +0000 http://www.auto-professionals.co.uk/showthread.php?tid=22309 While trying to read a PIC18F252 from the immo box of Land Rover Freelander 2006, internal EEPROM was erased by mistake hence we need a full dump.
Does anyone have such a dump (EEPROM + firmware), or has an immo box and is willing to read and post the dump here?
I'm attaching pictures of this immo box.
Cheers.]]> While trying to read a PIC18F252 from the immo box of Land Rover Freelander 2006, internal EEPROM was erased by mistake hence we need a full dump.
Does anyone have such a dump (EEPROM + firmware), or has an immo box and is willing to read and post the dump here?
I'm attaching pictures of this immo box.
Cheers.]]> http://www.auto-professionals.co.uk/showthread.php?tid=22301 Thu, 04 Jul 2019 00:42:24 +0000 http://www.auto-professionals.co.uk/showthread.php?tid=22301 We have this Range Rover Sport 2006 2.7 TDV6 with a zapped ECM due to customer reverse connecting jump-start cables.
ECM is a Siemens SID204 NNN500750 5WS40278B-T.

We want to start the car by getting a used ECM from ebay and programming it to the car.
The original ECM data cannot be read because it is completely dead so we cannot clone it to the replacement.
The other option is to virginize the new one and then program it to car.
We need to get answers for the following questions:

1. Does anyone have a full BDM of such an ECU?
2. Does anyone have a virginized eeprom or full BDM file?
3. Does a virgin ECM self adapt to the car or must it be programmed with diagnostic equipment (dealer or aftermarket)?

More info about the car:
Engine code: 276DT
(L320) (05-13)
140 kW (190hp) 4000 rpm
(2005-2009)

Thanks for any help offered.
Cheers!]]> We have this Range Rover Sport 2006 2.7 TDV6 with a zapped ECM due to customer reverse connecting jump-start cables.
ECM is a Siemens SID204 NNN500750 5WS40278B-T.

We want to start the car by getting a used ECM from ebay and programming it to the car.
The original ECM data cannot be read because it is completely dead so we cannot clone it to the replacement.
The other option is to virginize the new one and then program it to car.
We need to get answers for the following questions:

1. Does anyone have a full BDM of such an ECU?
2. Does anyone have a virginized eeprom or full BDM file?
3. Does a virgin ECM self adapt to the car or must it be programmed with diagnostic equipment (dealer or aftermarket)?

More info about the car:
Engine code: 276DT
(L320) (05-13)
140 kW (190hp) 4000 rpm
(2005-2009)

Thanks for any help offered.
Cheers!]]> http://www.auto-professionals.co.uk/showthread.php?tid=21552 Fri, 05 Oct 2018 19:40:31 +0000 http://www.auto-professionals.co.uk/showthread.php?tid=21552 Does anyone have experience in programming aftermarket flip keys for Disco 3 2005-2009?
I have Genuine JLR SDD with full security but don't want to chuck £80.00 away on a Key if it can't be done in the normal fashion.
Thanks in advance.
Diag0309]]> Does anyone have experience in programming aftermarket flip keys for Disco 3 2005-2009?
I have Genuine JLR SDD with full security but don't want to chuck £80.00 away on a Key if it can't be done in the normal fashion.
Thanks in advance.
Diag0309]]> http://www.auto-professionals.co.uk/showthread.php?tid=21313 Sun, 22 Jul 2018 22:16:12 +0000 http://www.auto-professionals.co.uk/showthread.php?tid=21313 I have it running by buying a used Pektron module and pairing it to the Mems3 ECU but I would like to know if possible what has happened to the original ECU dump file.
A new fob was added but failed to work as it appears the bin file is corrupted.
Thanks.
Lee]]> I have it running by buying a used Pektron module and pairing it to the Mems3 ECU but I would like to know if possible what has happened to the original ECU dump file.
A new fob was added but failed to work as it appears the bin file is corrupted.
Thanks.
Lee]]> http://www.auto-professionals.co.uk/showthread.php?tid=21267 Sun, 08 Jul 2018 22:24:23 +0000 http://www.auto-professionals.co.uk/showthread.php?tid=21267 Been called to this car which has one working key. Another key has been stolen. So I need to block the missing key and add a new key. I understand that JLR have gone to great lengths to stop the cars getting stolen so adding a key might be interesting, but I cant seem to even block the missing key.

When I run the add or disable key service function, I get a screen which says:
"The keyless vehicle module software is not at the required level to carry out the application. Please run the existing keyless vehicle module application first to update the software. Then return here."

I'm guessing its saying that the KVM needs to be updated. OK. Where does that happen?
I thought it might be in the install new module service function, but that says the same thing as above.
Is there a service function I'm missing, or is it just wanting me to install a new KVM?

Thanks for any help.]]> Been called to this car which has one working key. Another key has been stolen. So I need to block the missing key and add a new key. I understand that JLR have gone to great lengths to stop the cars getting stolen so adding a key might be interesting, but I cant seem to even block the missing key.

When I run the add or disable key service function, I get a screen which says:
"The keyless vehicle module software is not at the required level to carry out the application. Please run the existing keyless vehicle module application first to update the software. Then return here."

I'm guessing its saying that the KVM needs to be updated. OK. Where does that happen?
I thought it might be in the install new module service function, but that says the same thing as above.
Is there a service function I'm missing, or is it just wanting me to install a new KVM?

Thanks for any help.]]> http://www.auto-professionals.co.uk/showthread.php?tid=20963 Mon, 02 Apr 2018 16:15:25 +0000 http://www.auto-professionals.co.uk/showthread.php?tid=20963
Please can i turn immo off please in this car?
It is Range Rover P38 Year 1998.
If yes what kind of eeprom can be inside?

Thank you.

IMG-9c9c7c5b8c749af1c5d697481cc844fa-V.jpg
File Type:
Downloaded:	11 times
Size:	215.09 KB

]]>
Please can i turn immo off please in this car?
It is Range Rover P38 Year 1998.
If yes what kind of eeprom can be inside?

Thank you.

IMG-9c9c7c5b8c749af1c5d697481cc844fa-V.jpg
File Type:
Downloaded:	11 times
Size:	215.09 KB

]]> http://www.auto-professionals.co.uk/showthread.php?tid=20305 Mon, 23 Oct 2017 07:09:56 +0000 http://www.auto-professionals.co.uk/showthread.php?tid=20305 How are you?
Please dear friends, can I turn Immo OFF please for this car?
Please which memory should i read inside?
I think is year 1998-1999.

EDIT:
Any news my dear friends?

ROVER2.jpg
File Type:
Downloaded:	21 times
Size:	113.57 KB

ROVER 1.jpg
File Type:
Downloaded:	16 times
Size:	118.11 KB

]]> How are you?
Please dear friends, can I turn Immo OFF please for this car?
Please which memory should i read inside?
I think is year 1998-1999.

EDIT:
Any news my dear friends?

ROVER2.jpg
File Type:
Downloaded:	21 times
Size:	113.57 KB

ROVER 1.jpg
File Type:
Downloaded:	16 times
Size:	118.11 KB

]]> http://www.auto-professionals.co.uk/showthread.php?tid=20237 Wed, 04 Oct 2017 20:13:10 +0000 http://www.auto-professionals.co.uk/showthread.php?tid=20237 This is not all key lost situation, customer just have one working key.]]> This is not all key lost situation, customer just have one working key.]]> http://www.auto-professionals.co.uk/showthread.php?tid=20118 Thu, 24 Aug 2017 19:44:55 +0000 http://www.auto-professionals.co.uk/showthread.php?tid=20118
Someone can provide original file of this Range Rover Sport HSE?

HW: NNN501090
SW: NNS507570 - 4271

Thank you very much.]]>
Someone can provide original file of this Range Rover Sport HSE?

HW: NNN501090
SW: NNS507570 - 4271

Thank you very much.]]> http://www.auto-professionals.co.uk/showthread.php?tid=19937 Fri, 07 Jul 2017 09:21:46 +0000 http://www.auto-professionals.co.uk/showthread.php?tid=19937
Please kindly help to remove the EGR, and if possible stage 1 also.

Thanks.

sid208 backup.rar
File Type:
Downloaded:	9 times
Size:	866.79 KB

]]>
Please kindly help to remove the EGR, and if possible stage 1 also.

Thanks.

sid208 backup.rar
File Type:
Downloaded:	9 times
Size:	866.79 KB

]]> http://www.auto-professionals.co.uk/showthread.php?tid=19862 Wed, 14 Jun 2017 01:10:31 +0000 http://www.auto-professionals.co.uk/showthread.php?tid=19862
I have Land Rover ABS made by ATE company.
MCU: 99519 V599 KA
How to read/write?
Here I attached picture.

Thanks.

IMG_1409.rar
File Type:
Downloaded:	2 times
Size:	171.8 KB

]]>
I have Land Rover ABS made by ATE company.
MCU: 99519 V599 KA
How to read/write?
Here I attached picture.

Thanks.

IMG_1409.rar
File Type:
Downloaded:	2 times
Size:	171.8 KB

]]>