<![CDATA[Auto-Professionals - Porsche]]> http://www.auto-professionals.co.uk/ Sat, 30 May 2026 13:34:19 +0000 MyBB <![CDATA[Porsche PIWIS III 3 With Clone VCX/VAS5164 Firmware 18.4]]> http://www.auto-professionals.co.uk/showthread.php?tid=23384 Thu, 04 Mar 2021 10:37:25 +0000 http://www.auto-professionals.co.uk/showthread.php?tid=23384 Info on PM.

BR
EDDY

Edit By Patrian
Please READ & FOLLOW the AP Rules from Here!
Rule #8
Thanks for your Attention! yes]]> Info on PM.

BR
EDDY

Edit By Patrian
Please READ & FOLLOW the AP Rules from Here!
Rule #8
Thanks for your Attention! yes]]> <![CDATA[Porsche Cheapest Diagnostic Recommentations]]> http://www.auto-professionals.co.uk/showthread.php?tid=21582 Thu, 18 Oct 2018 15:24:03 +0000 http://www.auto-professionals.co.uk/showthread.php?tid=21582 <![CDATA[Porsche PIWIS II Hardware]]> http://www.auto-professionals.co.uk/showthread.php?tid=18702 Mon, 10 Oct 2016 19:09:56 +0000 http://www.auto-professionals.co.uk/showthread.php?tid=18702 I am looking for the Yanhua Piwis II Tester, only hardware, without laptop and without software.
Do you know if it is still available?
Thank you.
Best regards. bow
Yanhua.jpg
File Type: .jpg
Downloaded: 16 times
Size: 18.48 KB

]]> I am looking for the Yanhua Piwis II Tester, only hardware, without laptop and without software.
Do you know if it is still available?
Thank you.
Best regards. bow
Yanhua.jpg
File Type: .jpg
Downloaded: 16 times
Size: 18.48 KB

]]> <![CDATA[Porsche PIWIS I Hardware]]> http://www.auto-professionals.co.uk/showthread.php?tid=11693 Fri, 06 Jun 2014 19:10:25 +0000 http://www.auto-professionals.co.uk/showthread.php?tid=11693 I am sorting through some issues with the PIWIS I v34 from TurboFan.
Have tested though the i Scan-II WT IMS-Porsche utility and I am wondering still about the Vehicle handover not getting past the ECM.
So, I would like a known good hardware supplier.
I found a guy on e-Bay
Based in Slovakia, I can't post his stuff here.
Has anyone bought PIWIS cables and such from Slovakia?
Or do you all know of a good source?]]> I am sorting through some issues with the PIWIS I v34 from TurboFan.
Have tested though the i Scan-II WT IMS-Porsche utility and I am wondering still about the Vehicle handover not getting past the ECM.
So, I would like a known good hardware supplier.
I found a guy on e-Bay
Based in Slovakia, I can't post his stuff here.
Has anyone bought PIWIS cables and such from Slovakia?
Or do you all know of a good source?]]> <![CDATA[Porsche KTS520 Firmware Update Problem]]> http://www.auto-professionals.co.uk/showthread.php?tid=11299 Sat, 03 May 2014 20:09:15 +0000 http://www.auto-professionals.co.uk/showthread.php?tid=11299
I got a KTS520 (genuine) from a friend who no longer needed it + a T30 laptop with PIWIS V29 installed.

I purchased a special cable from Patrian handshakeenjoy

I flashed the KTS from V29 and every thing went OK. I then tried to up date the PIWIS to V30. Unfortunately this failed and the T30 turned into a paperweight with only two options 1: restart installation 2: recovery, neither works.

I then tried to use a VM with V34 installed and tried this with the KTS, but now it is no longer recognised, using DDC the usb port shows as USB#302 regardless of what I try, delete the existing entry / delete the ini etc.

I have rebuilt the T30 with a clean XP and installed ESI and the FWupdate, yet I still cant connect to the KTS.

The power supply led flashes as it should. I have even opened it up to look for bad joints, cant see any.

If I plug in just the USB cable and connect it to the T30 the small led next to the USB port lights up brightly, then when I plug in the power supply the power led flashes, but the led next to the USB port suddenly goes very dim.

I am stuck as what to do, if I can just get to communicate with the KTS that would be a start.

One request, does anyone have a ghost image of the T30 V29 PIWIS software, so at least I can get the T30 back to a good situation.

Thanking everyone in advance.

Bigfoot]]>
I got a KTS520 (genuine) from a friend who no longer needed it + a T30 laptop with PIWIS V29 installed.

I purchased a special cable from Patrian handshakeenjoy

I flashed the KTS from V29 and every thing went OK. I then tried to up date the PIWIS to V30. Unfortunately this failed and the T30 turned into a paperweight with only two options 1: restart installation 2: recovery, neither works.

I then tried to use a VM with V34 installed and tried this with the KTS, but now it is no longer recognised, using DDC the usb port shows as USB#302 regardless of what I try, delete the existing entry / delete the ini etc.

I have rebuilt the T30 with a clean XP and installed ESI and the FWupdate, yet I still cant connect to the KTS.

The power supply led flashes as it should. I have even opened it up to look for bad joints, cant see any.

If I plug in just the USB cable and connect it to the T30 the small led next to the USB port lights up brightly, then when I plug in the power supply the power led flashes, but the led next to the USB port suddenly goes very dim.

I am stuck as what to do, if I can just get to communicate with the KTS that would be a start.

One request, does anyone have a ghost image of the T30 V29 PIWIS software, so at least I can get the T30 back to a good situation.

Thanking everyone in advance.

Bigfoot]]> <![CDATA[Porsche PIWIS II Admin Password?]]> http://www.auto-professionals.co.uk/showthread.php?tid=9868 Fri, 14 Feb 2014 20:16:15 +0000 http://www.auto-professionals.co.uk/showthread.php?tid=9868 <![CDATA[Porsche PIWIS Standard 16 PIN Lead Configuration?]]> http://www.auto-professionals.co.uk/showthread.php?tid=6930 Fri, 11 Oct 2013 20:27:56 +0000 http://www.auto-professionals.co.uk/showthread.php?tid=6930
I have Piwis V34 running on a KTS 650 with the standard bosch non multiplexed 16 pin lead and it works correctly on all the newer vehicles, but has a habit of missing some modules on the earlier models.

I believe there is a resister that needs fitting on pins 4/5 and two pins need be connected together (2 & 6) on the 16 pin DLC to make it a "true" Porsche lead, can anybody confirm and tell me the resister needed?

Thanks in advance for your help.

Mark]]>
I have Piwis V34 running on a KTS 650 with the standard bosch non multiplexed 16 pin lead and it works correctly on all the newer vehicles, but has a habit of missing some modules on the earlier models.

I believe there is a resister that needs fitting on pins 4/5 and two pins need be connected together (2 & 6) on the 16 pin DLC to make it a "true" Porsche lead, can anybody confirm and tell me the resister needed?

Thanks in advance for your help.

Mark]]> <![CDATA[Porsche Durametric Cable Original]]> http://www.auto-professionals.co.uk/showthread.php?tid=5389 Sun, 16 Jun 2013 18:20:06 +0000 http://www.auto-professionals.co.uk/showthread.php?tid=5389
Durametric sells an Enthusiast version of their interface which is limited to 3 VINs. Anyone know of a possibility to cure this limitation?

Thanks.

Regards,
CF]]>
Durametric sells an Enthusiast version of their interface which is limited to 3 VINs. Anyone know of a possibility to cure this limitation?

Thanks.

Regards,
CF]]> <![CDATA[Porsche PIWIS Password?]]> http://www.auto-professionals.co.uk/showthread.php?tid=2860 Tue, 05 Mar 2013 20:19:39 +0000 http://www.auto-professionals.co.uk/showthread.php?tid=2860

Using the KTS 650 Piwis version, sometimes is necessary to manage the control panel but the sytem asks for privilege so you need the password.
Anybody knows which is the Piwis password?
For example if you need to modify the screen resolution or if you need to install a new driver.

Thank you and best regards. cheerleader]]>

Using the KTS 650 Piwis version, sometimes is necessary to manage the control panel but the sytem asks for privilege so you need the password.
Anybody knows which is the Piwis password?
For example if you need to modify the screen resolution or if you need to install a new driver.

Thank you and best regards. cheerleader]]> <![CDATA[Porsche Durametric Cable Clone]]> http://www.auto-professionals.co.uk/showthread.php?tid=2733 Thu, 28 Feb 2013 02:39:54 +0000 http://www.auto-professionals.co.uk/showthread.php?tid=2733
I know, i know this is cheap counterfeit and won't have all features the real tool has. I see maybe 3 a year. I kinda wish the cable covers 2007- Cayenne, but all the ones i see do not.

If you say these cables are a real POS and do not work, even 25$ is too much. If it can do most of what a real Durametric enthusiast cable does, it should be enough for what i need. I KNOW it won't do keys and immo.]]>
I know, i know this is cheap counterfeit and won't have all features the real tool has. I see maybe 3 a year. I kinda wish the cable covers 2007- Cayenne, but all the ones i see do not.

If you say these cables are a real POS and do not work, even 25$ is too much. If it can do most of what a real Durametric enthusiast cable does, it should be enough for what i need. I KNOW it won't do keys and immo.]]> <![CDATA[Porsche 964 + Porsche PIWIS?]]> http://www.auto-professionals.co.uk/showthread.php?tid=2579 Thu, 21 Feb 2013 08:25:05 +0000 http://www.auto-professionals.co.uk/showthread.php?tid=2579
Can I use a normal OBD to 19pin adapter or do I need to make some kind of lead to wire directly to the socket on the KTS unit?

Thanks]]>
Can I use a normal OBD to 19pin adapter or do I need to make some kind of lead to wire directly to the socket on the KTS unit?

Thanks]]> <![CDATA[Porsche PIWIS II System]]> http://www.auto-professionals.co.uk/showthread.php?tid=1589 Mon, 07 Jan 2013 17:59:26 +0000 http://www.auto-professionals.co.uk/showthread.php?tid=1589

Did anyone here using Piwis tester 2?

I'm currently using Piwis Tester ii with engineering option. I bought this 2 years ago and paid USD 20.000.00, and bought this when i'm really no other option..just because i'm really need this during that time ..devil

Also...i need to open google translate with other notebook and learn some german as well....mmm

Until now... I'm just curious:smoke what's the different between original Piwis ii and engineering option Piwis??

From what i found on some Chinese website, i'm noticed that original Piwis ii come with Fault Finding, Wiring Diagram, and ECU programming function...etc..

So...any opinion mate...]]>

Did anyone here using Piwis tester 2?

I'm currently using Piwis Tester ii with engineering option. I bought this 2 years ago and paid USD 20.000.00, and bought this when i'm really no other option..just because i'm really need this during that time ..devil

Also...i need to open google translate with other notebook and learn some german as well....mmm

Until now... I'm just curious:smoke what's the different between original Piwis ii and engineering option Piwis??

From what i found on some Chinese website, i'm noticed that original Piwis ii come with Fault Finding, Wiring Diagram, and ECU programming function...etc..

So...any opinion mate...]]> <![CDATA[Downgrade Procedure KTS520 – PIWIS Usage]]> http://www.auto-professionals.co.uk/showthread.php?tid=722 Tue, 06 Nov 2012 14:35:50 +0000 http://www.auto-professionals.co.uk/showthread.php?tid=722
porsche-kts520.txt
File Type: .txt
Downloaded: 358 times
Size: 149 bytes

]]>
porsche-kts520.txt
File Type: .txt
Downloaded: 358 times
Size: 149 bytes

]]>