http://www.auto-professionals.co.uk/ Sat, 30 May 2026 12:41:51 +0000 MyBB http://www.auto-professionals.co.uk/showthread.php?tid=20951 Thu, 29 Mar 2018 14:03:32 +0000 http://www.auto-professionals.co.uk/showthread.php?tid=20951 Apparently, for whatever reason, this option and "menu item" was turned off for the NAR vehicles.

Being relatively new to the software that can be used to work on Land Rovers, I wasn't sure if this was something that might be able to be modified via JLR SDD or some other software. It "appears" to be software/region specific related and not a hardware issue.

I was curious if anyone has any insight or experience with the software available to know whether or not this is something that can be done?]]> Apparently, for whatever reason, this option and "menu item" was turned off for the NAR vehicles.

Being relatively new to the software that can be used to work on Land Rovers, I wasn't sure if this was something that might be able to be modified via JLR SDD or some other software. It "appears" to be software/region specific related and not a hardware issue.

I was curious if anyone has any insight or experience with the software available to know whether or not this is something that can be done?]]> http://www.auto-professionals.co.uk/showthread.php?tid=20950 Thu, 29 Mar 2018 13:58:30 +0000 http://www.auto-professionals.co.uk/showthread.php?tid=20950 I was thinking about getting a Mongoose, but wasn't sure if there were cheaper options that I already have access to.

I have a 2015.5 RRS I need to do some work on.]]> I was thinking about getting a Mongoose, but wasn't sure if there were cheaper options that I already have access to.

I have a 2015.5 RRS I need to do some work on.]]> http://www.auto-professionals.co.uk/showthread.php?tid=19007 Tue, 06 Dec 2016 16:09:44 +0000 http://www.auto-professionals.co.uk/showthread.php?tid=19007
Could you please tell me what diagnostic tool do you use for problems with the self leveling suspension (EHC 2) on the early Range Rover III 2002-2005?
My JLR SDD software only works with 2005+ RR, Bosch KTS won't communicate with the suspension ECU.

Thank you.]]>
Could you please tell me what diagnostic tool do you use for problems with the self leveling suspension (EHC 2) on the early Range Rover III 2002-2005?
My JLR SDD software only works with 2005+ RR, Bosch KTS won't communicate with the suspension ECU.

Thank you.]]> http://www.auto-professionals.co.uk/showthread.php?tid=15080 Fri, 10 Apr 2015 19:12:44 +0000 http://www.auto-professionals.co.uk/showthread.php?tid=15080 Does anyone know what diagnostic software/equipment for new MG are using?
Cheers. ]]> Does anyone know what diagnostic software/equipment for new MG are using?
Cheers. ]]> http://www.auto-professionals.co.uk/showthread.php?tid=13456 Sun, 09 Nov 2014 19:12:08 +0000 http://www.auto-professionals.co.uk/showthread.php?tid=13456
Anyone using SDD with Da-vina J2534?

I need some info about it.

Thanks.]]>
Anyone using SDD with Da-vina J2534?

I need some info about it.

Thanks.]]> http://www.auto-professionals.co.uk/showthread.php?tid=11988 Tue, 01 Jul 2014 22:28:48 +0000 http://www.auto-professionals.co.uk/showthread.php?tid=11988
I think that if I can get it up and running again I can update it and get it going again.

I would really appreciate some help quickly if anyone can help me out.

Thanks]]>
I think that if I can get it up and running again I can update it and get it going again.

I would really appreciate some help quickly if anyone can help me out.

Thanks]]> http://www.auto-professionals.co.uk/showthread.php?tid=10829 Wed, 02 Apr 2014 20:12:44 +0000 http://www.auto-professionals.co.uk/showthread.php?tid=10829
I have acquired recently a VCM (the ones with blue VCM sticker not the common red VCM sticker) original unit and having problems since i got it. Running V130, 131, 134, 137.....it doesn't matter i get the same result. When it boots up, ALL led's come on steady and remain on. If i unplug and reconnect they ALL remain on, not going through the usual boot up sequence.

However, if i leave the unit off for a time (i haven't managed to pick up a pattern but usually around 10mins is a safe bet) then reconnect power supply, the unit will boot up in sequence and i have to load a new flash EVERY time, only then will it connect to the pc and i start connecting to the car.

If i disconnect power and reconnect, all led's remain steady again and no connect. Have to leave disconnected for the 10min.

Is the unit bum?]]>
I have acquired recently a VCM (the ones with blue VCM sticker not the common red VCM sticker) original unit and having problems since i got it. Running V130, 131, 134, 137.....it doesn't matter i get the same result. When it boots up, ALL led's come on steady and remain on. If i unplug and reconnect they ALL remain on, not going through the usual boot up sequence.

However, if i leave the unit off for a time (i haven't managed to pick up a pattern but usually around 10mins is a safe bet) then reconnect power supply, the unit will boot up in sequence and i have to load a new flash EVERY time, only then will it connect to the pc and i start connecting to the car.

If i disconnect power and reconnect, all led's remain steady again and no connect. Have to leave disconnected for the 10min.

Is the unit bum?]]> http://www.auto-professionals.co.uk/showthread.php?tid=5850 Wed, 17 Jul 2013 09:39:24 +0000 http://www.auto-professionals.co.uk/showthread.php?tid=5850 I have recently bought a second hand Laptop T4 from a Landrover specialist here in the UK.
I seem to have all the Landrover discs. Can I run this same equipment to diagnose Rover cars. I realize I would have to find a copy of the Rover discs but would it run with this machine or would I have to run two partitions.
I believe I have an official Omnitec unit.

Charlie]]> I have recently bought a second hand Laptop T4 from a Landrover specialist here in the UK.
I seem to have all the Landrover discs. Can I run this same equipment to diagnose Rover cars. I realize I would have to find a copy of the Rover discs but would it run with this machine or would I have to run two partitions.
I believe I have an official Omnitec unit.

Charlie]]> http://www.auto-professionals.co.uk/showthread.php?tid=3663 Fri, 05 Apr 2013 15:06:29 +0000 http://www.auto-professionals.co.uk/showthread.php?tid=3663 http://www.auto-professionals.co.uk/showthread.php?tid=3196 Mon, 18 Mar 2013 22:20:22 +0000 http://www.auto-professionals.co.uk/showthread.php?tid=3196
I'm new on this forum.
I have a Land Rover Discovery TD5 de2001.
I would like to know if there is a style ELM327 interface to view different ECU with a laptop or a smartphone?

Thank you for your help.]]>
I'm new on this forum.
I have a Land Rover Discovery TD5 de2001.
I would like to know if there is a style ELM327 interface to view different ECU with a laptop or a smartphone?

Thank you for your help.]]> http://www.auto-professionals.co.uk/showthread.php?tid=1601 Tue, 08 Jan 2013 06:39:11 +0000 http://www.auto-professionals.co.uk/showthread.php?tid=1601 which can worked well and support any LR/Jag
from old year until now

because the Da*n Chn selling two type :
which cover only
1996-2005 /or 2006 - up LR/Jag vehicles (two options)

Which parts i should take a noted for this Toys ?
have to be careful with those Alligator sellers

And any chance to get a Hi Q clone that could worked for both
Ford, Mazda, LR, Jag from Old to Newest ??
Plastic or Metal case is the best clone ?

Appreciate any kind of thought here and anyone can
send PM to me, so it will not against the rules.

Thanks
regards,
]]> which can worked well and support any LR/Jag
from old year until now

because the Da*n Chn selling two type :
which cover only
1996-2005 /or 2006 - up LR/Jag vehicles (two options)

Which parts i should take a noted for this Toys ?
have to be careful with those Alligator sellers

And any chance to get a Hi Q clone that could worked for both
Ford, Mazda, LR, Jag from Old to Newest ??
Plastic or Metal case is the best clone ?

Appreciate any kind of thought here and anyone can
send PM to me, so it will not against the rules.

Thanks
regards,
]]>