http://www.auto-professionals.co.uk/ Sat, 30 May 2026 13:34:18 +0000 MyBB http://www.auto-professionals.co.uk/showthread.php?tid=18436 Tue, 23 Aug 2016 04:58:56 +0000 http://www.auto-professionals.co.uk/showthread.php?tid=18436 I work with my Bosch 550 card PassThru fine in Toyota Techstream and Volvo Vida.
Is it possible to work with Honda HDS too?
If yes, which is the way and the best version?
Thanks a lot.]]> I work with my Bosch 550 card PassThru fine in Toyota Techstream and Volvo Vida.
Is it possible to work with Honda HDS too?
If yes, which is the way and the best version?
Thanks a lot.]]> http://www.auto-professionals.co.uk/showthread.php?tid=14343 Mon, 26 Jan 2015 12:21:40 +0000 http://www.auto-professionals.co.uk/showthread.php?tid=14343
I read somewhere Honda HDS works with Actia VCI, i have old (blue/yellow) VCI and need to know if there's a special driver or patch to make it work.

Already did some search but didn´t find anything.

Thank you!]]>
I read somewhere Honda HDS works with Actia VCI, i have old (blue/yellow) VCI and need to know if there's a special driver or patch to make it work.

Already did some search but didn´t find anything.

Thank you!]]> http://www.auto-professionals.co.uk/showthread.php?tid=14150 Fri, 09 Jan 2015 13:57:05 +0000 http://www.auto-professionals.co.uk/showthread.php?tid=14150 Many thanks.]]> Many thanks.]]> http://www.auto-professionals.co.uk/showthread.php?tid=11251 Tue, 29 Apr 2014 10:07:40 +0000 http://www.auto-professionals.co.uk/showthread.php?tid=11251
What is the main difference between Honda HIM and GNA600.

What advantages does an GNA600 has compared to a HIM?

BR]]>
What is the main difference between Honda HIM and GNA600.

What advantages does an GNA600 has compared to a HIM?

BR]]> http://www.auto-professionals.co.uk/showthread.php?tid=11184 Wed, 23 Apr 2014 17:09:37 +0000 http://www.auto-professionals.co.uk/showthread.php?tid=11184
Is there a known way to make HDS work with the Cardaq-M?
I've tried with the 2.024 US version from the forum for some time now without any success at all. It doesn't find the interface and times out.

The Cardaq-m works perfectly with Techstream and toolbox3 on the same machine.

Thanx for any input.]]>
Is there a known way to make HDS work with the Cardaq-M?
I've tried with the 2.024 US version from the forum for some time now without any success at all. It doesn't find the interface and times out.

The Cardaq-m works perfectly with Techstream and toolbox3 on the same machine.

Thanx for any input.]]> http://www.auto-professionals.co.uk/showthread.php?tid=10535 Tue, 18 Mar 2014 19:34:11 +0000 http://www.auto-professionals.co.uk/showthread.php?tid=10535 When I entered the VIN, instead of the selection menus populating, I was shown a text box with "Incorrect VIN please re-enter".
I double checked the correct entry with the same result.

I selected a previous VIN from a 2009 Accord and the selection lists populated. I entered a mileage and when I selected the tick the screen cleared and showed "would you like to program this VIN to the ECU?"

It seems as if the VIN on the vehicle does not match the one stored in the ECU (incorrect VIN).
When I use a previous session's VIN it wants to overwrite the one stored. It knows it isn't correct.

Is there any way to force a manually configured session or must I somehow read the stored VIN and then change it?

Other than that is the software playing up?
Have I gone blonde?]]> When I entered the VIN, instead of the selection menus populating, I was shown a text box with "Incorrect VIN please re-enter".
I double checked the correct entry with the same result.

I selected a previous VIN from a 2009 Accord and the selection lists populated. I entered a mileage and when I selected the tick the screen cleared and showed "would you like to program this VIN to the ECU?"

It seems as if the VIN on the vehicle does not match the one stored in the ECU (incorrect VIN).
When I use a previous session's VIN it wants to overwrite the one stored. It knows it isn't correct.

Is there any way to force a manually configured session or must I somehow read the stored VIN and then change it?

Other than that is the software playing up?
Have I gone blonde?]]> http://www.auto-professionals.co.uk/showthread.php?tid=9450 Sun, 26 Jan 2014 16:02:47 +0000 http://www.auto-professionals.co.uk/showthread.php?tid=9450 Before buying any GNA600...
Here is the all original Honda GNA600 Serial Numbers...

SerialNumbers.rar
File Type:
Downloaded:	48 times
Size:	9.47 KB

]]> Before buying any GNA600...
Here is the all original Honda GNA600 Serial Numbers...

SerialNumbers.rar
File Type:
Downloaded:	48 times
Size:	9.47 KB

]]> http://www.auto-professionals.co.uk/showthread.php?tid=7200 Tue, 29 Oct 2013 21:58:08 +0000 http://www.auto-professionals.co.uk/showthread.php?tid=7200
If anyone has any kind of input of info or opinion on this tool, I'd greatly appreciate it.

Thank You]]>
If anyone has any kind of input of info or opinion on this tool, I'd greatly appreciate it.

Thank You]]> http://www.auto-professionals.co.uk/showthread.php?tid=7126 Thu, 24 Oct 2013 21:14:12 +0000 http://www.auto-professionals.co.uk/showthread.php?tid=7126
(It's a genuine Honda SPX-MVCI, HDS version 3.005)

Thank you for any help or input you can give me.]]>
(It's a genuine Honda SPX-MVCI, HDS version 3.005)

Thank you for any help or input you can give me.]]> http://www.auto-professionals.co.uk/showthread.php?tid=5625 Tue, 02 Jul 2013 15:50:44 +0000 http://www.auto-professionals.co.uk/showthread.php?tid=5625
1) I don't currently have any diagnostic tools / ECU clearing tools for Honda, and I'm out of the USA.

2) I'd rather not fork over for the GNA600.

Are there any economical diagostic tools (maybe even universal), that would allow me to read and clear codes for a 2001 Honda Accord and / or possibly other makes / models?

Thanks!

Removed...]]>
1) I don't currently have any diagnostic tools / ECU clearing tools for Honda, and I'm out of the USA.

2) I'd rather not fork over for the GNA600.

Are there any economical diagostic tools (maybe even universal), that would allow me to read and clear codes for a 2001 Honda Accord and / or possibly other makes / models?

Thanks!

Removed...]]> http://www.auto-professionals.co.uk/showthread.php?tid=4310 Thu, 02 May 2013 15:39:22 +0000 http://www.auto-professionals.co.uk/showthread.php?tid=4310
I have Honda MVCI (X-Horse MVCI-HC) device.
It has firmware 1.4.1 and I want to update its firmware.
Online update says "Unable to connect to the update server, pleas check the network connection." so online update server is off.
Only way is to update with MVCI upgrade file (*.mfu).
Where can I get it?

Thanks]]>
I have Honda MVCI (X-Horse MVCI-HC) device.
It has firmware 1.4.1 and I want to update its firmware.
Online update says "Unable to connect to the update server, pleas check the network connection." so online update server is off.
Only way is to update with MVCI upgrade file (*.mfu).
Where can I get it?

Thanks]]> http://www.auto-professionals.co.uk/showthread.php?tid=2389 Wed, 13 Feb 2013 03:19:00 +0000 http://www.auto-professionals.co.uk/showthread.php?tid=2389 http://www.auto-professionals.co.uk/showthread.php?tid=1181 Tue, 11 Dec 2012 12:34:58 +0000 http://www.auto-professionals.co.uk/showthread.php?tid=1181

Thank You
Dan]]>

Thank You
Dan]]> http://www.auto-professionals.co.uk/showthread.php?tid=1156 Sun, 09 Dec 2012 18:06:22 +0000 http://www.auto-professionals.co.uk/showthread.php?tid=1156

I run a small workshop and currently have snap on and Bosch KTS machines but we now a few Honda clients and so I've bought a cheap MVCI interface to see how we get on but I cant for the life of me get the thing to initialize.

The thing is an MVCI clone and came with the HDS 2.018, the drivers installed and it shows it as a USB serial port which I've set on com1, it doesn't show MVCI in device manager, not sure if its supposed to.

Does anyone have any tips/tricks with these or some later flash or update files for the interface as I cant get it to run. The HDS all loads up but does not communicate with the interface, tried changing com ports etc but I'm completely stumped

I've read a couple of threads about registry tweaks but I'd appreciate any help I can get

Many thanks

> > >Moved...]]>

I run a small workshop and currently have snap on and Bosch KTS machines but we now a few Honda clients and so I've bought a cheap MVCI interface to see how we get on but I cant for the life of me get the thing to initialize.

The thing is an MVCI clone and came with the HDS 2.018, the drivers installed and it shows it as a USB serial port which I've set on com1, it doesn't show MVCI in device manager, not sure if its supposed to.

Does anyone have any tips/tricks with these or some later flash or update files for the interface as I cant get it to run. The HDS all loads up but does not communicate with the interface, tried changing com ports etc but I'm completely stumped

I've read a couple of threads about registry tweaks but I'd appreciate any help I can get

Many thanks

> > >Moved...]]> http://www.auto-professionals.co.uk/showthread.php?tid=755 Sat, 10 Nov 2012 16:53:19 +0000 http://www.auto-professionals.co.uk/showthread.php?tid=755
I am in doubt about interface for key programing, on one side the x-vci ford which is supposed to support HDS, on other side x-100 handheld which is said to program keys without incode.

My doubts are, x-vci does it needs incode?, does ad100 calculates right code?, someone having feedback on Honda with this two?,

what about t300, is old device... I will mainly be doing civic 2007 Europe,

thanks a lot!
H.W]]>
I am in doubt about interface for key programing, on one side the x-vci ford which is supposed to support HDS, on other side x-100 handheld which is said to program keys without incode.

My doubts are, x-vci does it needs incode?, does ad100 calculates right code?, someone having feedback on Honda with this two?,

what about t300, is old device... I will mainly be doing civic 2007 Europe,

thanks a lot!
H.W]]>