http://www.auto-professionals.co.uk/ Sat, 30 May 2026 12:41:44 +0000 MyBB http://www.auto-professionals.co.uk/showthread.php?tid=22879 Wed, 22 Apr 2020 18:07:29 +0000 http://www.auto-professionals.co.uk/showthread.php?tid=22879
Ford Diagnostic Software.
The IDS and FDRS software is the only software that provides complete diagnostic coverage, including module programming and key programming of 1996 to current and future Ford and Lincoln vehicles. The IDS/FDRS will operate on PC platforms meeting the minimum specifications and having a valid software license subscription. IDS/FDRS software license subscriptions are available online at the PTS, Ford Fleet, or Motorcraft service website.

Vehicle Communication Module 3 (VCM 3).
The VCM 3 communicates with Ford and Lincoln vehicles via the 16-pin diagnostic link. This device is the core of vehicle diagnostics. An IDS software license subscription (sold separately) provides access to the software which uses the VCM 3 hardware to perform vehicle diagnostics.

Kit includes:
VCM 3
DLC cable
Heavy duty USB cable
Wireless adapter

The VCM 3 will operate as a Customer Flight Recorder (CFR) with an optional pendant cable 164-R9806 to replace the functionality of the Vehicle Data Recorder (VDR).
Includes enhanced 802.11n wireless that minimizes dependencies on service department wireless infrastructure.
Wireless functionality preferred for all IDS functions including module reprogramming. USB wired connections are only required to update the VCM 3 loaded code firmware and to set up the VCM3 to function as a Customer Flight Recorder (CFR).]]>
Ford Diagnostic Software.
The IDS and FDRS software is the only software that provides complete diagnostic coverage, including module programming and key programming of 1996 to current and future Ford and Lincoln vehicles. The IDS/FDRS will operate on PC platforms meeting the minimum specifications and having a valid software license subscription. IDS/FDRS software license subscriptions are available online at the PTS, Ford Fleet, or Motorcraft service website.

Vehicle Communication Module 3 (VCM 3).
The VCM 3 communicates with Ford and Lincoln vehicles via the 16-pin diagnostic link. This device is the core of vehicle diagnostics. An IDS software license subscription (sold separately) provides access to the software which uses the VCM 3 hardware to perform vehicle diagnostics.

Kit includes:
VCM 3
DLC cable
Heavy duty USB cable
Wireless adapter

The VCM 3 will operate as a Customer Flight Recorder (CFR) with an optional pendant cable 164-R9806 to replace the functionality of the Vehicle Data Recorder (VDR).
Includes enhanced 802.11n wireless that minimizes dependencies on service department wireless infrastructure.
Wireless functionality preferred for all IDS functions including module reprogramming. USB wired connections are only required to update the VCM 3 loaded code firmware and to set up the VCM3 to function as a Customer Flight Recorder (CFR).]]> http://www.auto-professionals.co.uk/showthread.php?tid=19531 Fri, 24 Mar 2017 20:24:31 +0000 http://www.auto-professionals.co.uk/showthread.php?tid=19531 Share your opinions.]]> Share your opinions.]]> http://www.auto-professionals.co.uk/showthread.php?tid=19496 Thu, 16 Mar 2017 21:12:40 +0000 http://www.auto-professionals.co.uk/showthread.php?tid=19496 After I update IDS to 104.XX a new options and tools are available. The new tool is VCMM which is a replacement and updated version of VMM.
You can find the tool on Motorcraft website rotunda tools.



The Vehicle Communication & Measurement Module (VCMM) combines all of the functionality of the VMM, VCM II, and MTS 4000/4100 vibration analyzer in an industry leading one-box solution. The combining of this functionality will provide dealers with industry leading diagnostic capability at a significantly lower cost of ownership.

Key Features:

Vehicle Communication (VCM II capability)
Customer Flight Recorder capable
4-Channel Oscilloscope
4-Channel Digital Multi-meter
5th-Channel direct monitoring of the DLC connector
Vibration Analysis
Driveline Balance*
Signal Generator


4/5 Channel Oscilloscope
Improved user interface from VMM
Four independent differential Input Channels enables independent monitoring of signal types such as monitoring voltage while concurrently measuring voltage drop across the circuit.
A Fifth High Speed Channel that can directly monitor CAN signals at the DLC connector
Capture/Record capability to assist in capturing intermittent issues
Advanced Triggering capability
Pre-Configured setup configuration for common signals and procedures
New “Time/Angle” time based settings (CKP/CMP timing diagnostics)


Vibration Analysis and Driveline Balance
Similar functionality to the MTS 4000/4100
Improved user interface with reduced configuration and setup time
Color display
Record capacity
“Strobe light Pick up loop” for improved component identification*
Optional second vibration transducer*
Optional Dual Plane driveline balance*

*Requires Advanced Kit (164-R9823)



The Digital Multi-Meter
Monitor up to four independent readings at the same time
Capture/Record history
Graphing capability for up to two channels
Voltage, Current, Resistance, Pulse Width, Duty Cycle, Frequency and Period


Signal Generator
User configurable settings for signal waveform types: sine, square, triangle, pulse generator, DC voltage and arbitrary.
Verify integrity of module input wiring and the module hardware
Improved interface and greater adjustability of voltage and frequency.

System Requirements:
The VCMM will run on any Windows 7 or higher operating system that has 8GB of RAM or higher.
IDS software subscription required.


5.130$



]]> After I update IDS to 104.XX a new options and tools are available. The new tool is VCMM which is a replacement and updated version of VMM.
You can find the tool on Motorcraft website rotunda tools.



The Vehicle Communication & Measurement Module (VCMM) combines all of the functionality of the VMM, VCM II, and MTS 4000/4100 vibration analyzer in an industry leading one-box solution. The combining of this functionality will provide dealers with industry leading diagnostic capability at a significantly lower cost of ownership.

Key Features:

Vehicle Communication (VCM II capability)
Customer Flight Recorder capable
4-Channel Oscilloscope
4-Channel Digital Multi-meter
5th-Channel direct monitoring of the DLC connector
Vibration Analysis
Driveline Balance*
Signal Generator


4/5 Channel Oscilloscope
Improved user interface from VMM
Four independent differential Input Channels enables independent monitoring of signal types such as monitoring voltage while concurrently measuring voltage drop across the circuit.
A Fifth High Speed Channel that can directly monitor CAN signals at the DLC connector
Capture/Record capability to assist in capturing intermittent issues
Advanced Triggering capability
Pre-Configured setup configuration for common signals and procedures
New “Time/Angle” time based settings (CKP/CMP timing diagnostics)


Vibration Analysis and Driveline Balance
Similar functionality to the MTS 4000/4100
Improved user interface with reduced configuration and setup time
Color display
Record capacity
“Strobe light Pick up loop” for improved component identification*
Optional second vibration transducer*
Optional Dual Plane driveline balance*

*Requires Advanced Kit (164-R9823)



The Digital Multi-Meter
Monitor up to four independent readings at the same time
Capture/Record history
Graphing capability for up to two channels
Voltage, Current, Resistance, Pulse Width, Duty Cycle, Frequency and Period


Signal Generator
User configurable settings for signal waveform types: sine, square, triangle, pulse generator, DC voltage and arbitrary.
Verify integrity of module input wiring and the module hardware
Improved interface and greater adjustability of voltage and frequency.

System Requirements:
The VCMM will run on any Windows 7 or higher operating system that has 8GB of RAM or higher.
IDS software subscription required.


5.130$



]]> http://www.auto-professionals.co.uk/showthread.php?tid=19213 Fri, 20 Jan 2017 05:12:51 +0000 http://www.auto-professionals.co.uk/showthread.php?tid=19213 Proof of concept today was a:
2014 Ford F-150 - 3.5L Turbo DI (Petrol) with Automatic 4X4

The FORScan Lite application was developed specially for controller and network diagnostics for Ford, Mazda, Lincoln and Mercury vehicles.
Requirements are:
- ELM327 or compatible OBDII adapter with Bluetooth or WiFi interface.
- Vehicles other than Ford, Mazda, Lincoln and Mercury are not supported
- Application may not work with some ELM327 clones of poor quality.
To make sure there are no compatibility problems, use the free demo version.

Recommended adapter: OBDLink MX but I use a high quality ELM with the HI-LO network switch v1.4

Features:
- Analyzing an on-board network configuration of the connected vehicle
- Read and reset diagnostic trouble codes (DTC) for all modules
- Read sensors and other data (PIDs) from all modules

Get it at Google play store and pay a small fee for a very good diagnostic tool. Added is the vehicle mentioned with screen images during diagnosis.
For a fast, portable Ford/Mazda/Lincoln/Mercury on an Android version, it is worth it to me. The choice is yours.

Password ONLY by PM for Active Members...

2014 F150 Forscan Lite Android ELM.rar
File Type:
Downloaded:	7 times
Size:	3.7 MB

]]> Proof of concept today was a:
2014 Ford F-150 - 3.5L Turbo DI (Petrol) with Automatic 4X4

The FORScan Lite application was developed specially for controller and network diagnostics for Ford, Mazda, Lincoln and Mercury vehicles.
Requirements are:
- ELM327 or compatible OBDII adapter with Bluetooth or WiFi interface.
- Vehicles other than Ford, Mazda, Lincoln and Mercury are not supported
- Application may not work with some ELM327 clones of poor quality.
To make sure there are no compatibility problems, use the free demo version.

Recommended adapter: OBDLink MX but I use a high quality ELM with the HI-LO network switch v1.4

Features:
- Analyzing an on-board network configuration of the connected vehicle
- Read and reset diagnostic trouble codes (DTC) for all modules
- Read sensors and other data (PIDs) from all modules

Get it at Google play store and pay a small fee for a very good diagnostic tool. Added is the vehicle mentioned with screen images during diagnosis.
For a fast, portable Ford/Mazda/Lincoln/Mercury on an Android version, it is worth it to me. The choice is yours.

Password ONLY by PM for Active Members...

2014 F150 Forscan Lite Android ELM.rar
File Type:
Downloaded:	7 times
Size:	3.7 MB

]]> http://www.auto-professionals.co.uk/showthread.php?tid=18609 Fri, 23 Sep 2016 17:07:38 +0000 http://www.auto-professionals.co.uk/showthread.php?tid=18609
Thanks.

]]>
Thanks.

]]> http://www.auto-professionals.co.uk/showthread.php?tid=17804 Sat, 30 Apr 2016 11:46:42 +0000 http://www.auto-professionals.co.uk/showthread.php?tid=17804 I'm using the great AP patched IDS V86.
What can I do next?
]]> I'm using the great AP patched IDS V86.
What can I do next?
]]> http://www.auto-professionals.co.uk/showthread.php?tid=17287 Sat, 20 Feb 2016 21:31:10 +0000 http://www.auto-professionals.co.uk/showthread.php?tid=17287 i have little question:
Where i can buy good interface for IDS and for activator from Mr. Visroni?
Anyone has any good idea? I don't want to buy a shitty one.
Thanks.]]> i have little question:
Where i can buy good interface for IDS and for activator from Mr. Visroni?
Anyone has any good idea? I don't want to buy a shitty one.
Thanks.]]> http://www.auto-professionals.co.uk/showthread.php?tid=17077 Mon, 18 Jan 2016 18:39:52 +0000 http://www.auto-professionals.co.uk/showthread.php?tid=17077

Here is the LATEST TSB (12.2015) about the 2x famous VCM's WITCH Vehicles support each other!

Good luck to anyone!

Best Regards!

Ford Vehicles VCM & VCM II Support (TSB 12.2015).pdf
File Type:
Downloaded:	171 times
Size:	76.4 KB

]]>

Here is the LATEST TSB (12.2015) about the 2x famous VCM's WITCH Vehicles support each other!

Good luck to anyone!

Best Regards!

Ford Vehicles VCM & VCM II Support (TSB 12.2015).pdf
File Type:
Downloaded:	171 times
Size:	76.4 KB

]]> http://www.auto-professionals.co.uk/showthread.php?tid=16195 Sun, 13 Sep 2015 07:58:08 +0000 http://www.auto-professionals.co.uk/showthread.php?tid=16195
So it will soon be dealer only...]]>
So it will soon be dealer only...]]> http://www.auto-professionals.co.uk/showthread.php?tid=15978 Wed, 12 Aug 2015 07:25:21 +0000 http://www.auto-professionals.co.uk/showthread.php?tid=15978
Anyone here still remember NGS+ T-shaped scan tool?
I have 2 genuine VCM modules and I'd like to use one module as NGS+.
I tried to change the firmware for the NGS+ but it's failed every time. I used a clean install Win XP with DBS34 software.
I hope someone can chime in this topic.

Thanks in advance and very best regards.
TK]]>
Anyone here still remember NGS+ T-shaped scan tool?
I have 2 genuine VCM modules and I'd like to use one module as NGS+.
I tried to change the firmware for the NGS+ but it's failed every time. I used a clean install Win XP with DBS34 software.
I hope someone can chime in this topic.

Thanks in advance and very best regards.
TK]]> http://www.auto-professionals.co.uk/showthread.php?tid=15696 Mon, 29 Jun 2015 12:41:14 +0000 http://www.auto-professionals.co.uk/showthread.php?tid=15696 I need to change the S/N in a clone VCM. I use this video. But I can not open IP. Got unknown error... Anybody know how i can change it?
Thank you.


]]> I need to change the S/N in a clone VCM. I use this video. But I can not open IP. Got unknown error... Anybody know how i can change it?
Thank you.


]]> http://www.auto-professionals.co.uk/showthread.php?tid=14135 Thu, 08 Jan 2015 00:35:09 +0000 http://www.auto-professionals.co.uk/showthread.php?tid=14135
Need some help here, trying to find proper tool to read Ford 1.8 TDDi 75hp from 2001 Delphi ECU.
I have tried with FGTech without success as it starts reading but stalls at 20% and gives error.
Some say FGTech V54 can read and write, but not mine as it is a clone BTW, (not sure if that is the reason).

If any could give me some advice on if FGTech is or not able to do this ECU as I know that Kess V2 can, but was wondering if FGTech can also.

Attached are ECU ID in .txt and FGTech Printscreen in docx.

Respect.

Print.docx
File Type:
Downloaded:	4 times
Size:	94.1 KB

Fiesta_1-8TDDi_75HP_2001.txt
File Type:
Downloaded:	1 times
Size:	56 bytes

]]>
Need some help here, trying to find proper tool to read Ford 1.8 TDDi 75hp from 2001 Delphi ECU.
I have tried with FGTech without success as it starts reading but stalls at 20% and gives error.
Some say FGTech V54 can read and write, but not mine as it is a clone BTW, (not sure if that is the reason).

If any could give me some advice on if FGTech is or not able to do this ECU as I know that Kess V2 can, but was wondering if FGTech can also.

Attached are ECU ID in .txt and FGTech Printscreen in docx.

Respect.

Print.docx
File Type:
Downloaded:	4 times
Size:	94.1 KB

Fiesta_1-8TDDi_75HP_2001.txt
File Type:
Downloaded:	1 times
Size:	56 bytes

]]> http://www.auto-professionals.co.uk/showthread.php?tid=12133 Sun, 13 Jul 2014 21:52:46 +0000 http://www.auto-professionals.co.uk/showthread.php?tid=12133 Ford VCM II SD 4GB V86

Software
USB tool.

Like someone has a copy of the SD card for Mazda could make to a test.

VCM II SD 4gb v85.txt
File Type:
Downloaded:	29 times
Size:	125 bytes

VCM II SD 4gb v86.txt
File Type:
Downloaded:	62 times
Size:	121 bytes

]]> Ford VCM II SD 4GB V86

Software
USB tool.

Like someone has a copy of the SD card for Mazda could make to a test.

VCM II SD 4gb v85.txt
File Type:
Downloaded:	29 times
Size:	125 bytes

VCM II SD 4gb v86.txt
File Type:
Downloaded:	62 times
Size:	121 bytes

]]> http://www.auto-professionals.co.uk/showthread.php?tid=9559 Fri, 31 Jan 2014 14:02:16 +0000 http://www.auto-professionals.co.uk/showthread.php?tid=9559 This is done by removing the HS CAN wires and fitting a switch so that the ELM327 can be switched between HS and MS CAN.

This mod was originally devised to work with Russian software such as FF2 and Elmconfig but can now be used with Forscan making it possible to retrieve fault codes from modules that a standard ELM327 cannot reach.

For this mod you will need a USB ELM327, a double pole double throw switch and 4 short lengths of hook-up wire.

For this guide I have used a cheap clone ELM327 such as those sold on fleabay etc.




For those not familiar with Elmconfig, the software allows car configuration data to be changed and is similar to VAGCOM. The software currently supports the Mk2 Focus and the Mk4 Mondeo platforms.
Some of the features of Elmconfig require a baud rate of 500k. Unfortunately a lot of Chinese ELM327's have problems with this speed due to using a cloned USB to UART chip so don't be tempted to buy the cheapest!
For those not too handy with a soldering iron, pre-modified ELM327's can be found on fleabay.]]> This is done by removing the HS CAN wires and fitting a switch so that the ELM327 can be switched between HS and MS CAN.

This mod was originally devised to work with Russian software such as FF2 and Elmconfig but can now be used with Forscan making it possible to retrieve fault codes from modules that a standard ELM327 cannot reach.

For this mod you will need a USB ELM327, a double pole double throw switch and 4 short lengths of hook-up wire.

For this guide I have used a cheap clone ELM327 such as those sold on fleabay etc.




For those not familiar with Elmconfig, the software allows car configuration data to be changed and is similar to VAGCOM. The software currently supports the Mk2 Focus and the Mk4 Mondeo platforms.
Some of the features of Elmconfig require a baud rate of 500k. Unfortunately a lot of Chinese ELM327's have problems with this speed due to using a cloned USB to UART chip so don't be tempted to buy the cheapest!
For those not too handy with a soldering iron, pre-modified ELM327's can be found on fleabay.]]> http://www.auto-professionals.co.uk/showthread.php?tid=8986 Tue, 07 Jan 2014 16:18:21 +0000 http://www.auto-professionals.co.uk/showthread.php?tid=8986
please can i help me

that machine to group ford-mazda crysler and Jaguar and land rover suggest

* Allscanner Bluetooth VCM VCX-Nano scanner for Ford Mazda, LandRover and Jaguar

* Best Quality Ford VCM II v86 Diagnostic Tool

any of you you have?. It works well.?

And some interface cable or soft to be able to sync pictures of instruments keys and ECU at ford.?

Thank you very much]]>
please can i help me

that machine to group ford-mazda crysler and Jaguar and land rover suggest

* Allscanner Bluetooth VCM VCX-Nano scanner for Ford Mazda, LandRover and Jaguar

* Best Quality Ford VCM II v86 Diagnostic Tool

any of you you have?. It works well.?

And some interface cable or soft to be able to sync pictures of instruments keys and ECU at ford.?

Thank you very much]]> http://www.auto-professionals.co.uk/showthread.php?tid=8675 Wed, 25 Dec 2013 23:04:50 +0000 http://www.auto-professionals.co.uk/showthread.php?tid=8675 I have a china focom clone that i tried with the latest software not the software supplied with it.
Now it says no interface connected when i try it with the software that came with it (it did work before).
Is it know that the later software can zap the interface? If so is their a reflash method to restore it?
I have tried to read the ic chip using mp lab but it cannot find any firmware on the chip.]]> I have a china focom clone that i tried with the latest software not the software supplied with it.
Now it says no interface connected when i try it with the software that came with it (it did work before).
Is it know that the later software can zap the interface? If so is their a reflash method to restore it?
I have tried to read the ic chip using mp lab but it cannot find any firmware on the chip.]]> http://www.auto-professionals.co.uk/showthread.php?tid=8385 Thu, 12 Dec 2013 20:34:41 +0000 http://www.auto-professionals.co.uk/showthread.php?tid=8385 When replacing clutch you need to learn the ecu the engage point for the clutch for example.
I have looked around but cant seem to find any info about it.]]> When replacing clutch you need to learn the ecu the engage point for the clutch for example.
I have looked around but cant seem to find any info about it.]]> http://www.auto-professionals.co.uk/showthread.php?tid=7346 Sun, 10 Nov 2013 11:12:08 +0000 http://www.auto-professionals.co.uk/showthread.php?tid=7346
For the Ford F-350 2012 model trucks, which Diagnostic tools to be used for Diagnosing?

I tried to connect via Ford VCM I with V79, and not connected to the this truck? Is it needed VCM II or any other tool?
Any ideas, or?

Regards]]>
For the Ford F-350 2012 model trucks, which Diagnostic tools to be used for Diagnosing?

I tried to connect via Ford VCM I with V79, and not connected to the this truck? Is it needed VCM II or any other tool?
Any ideas, or?

Regards]]> http://www.auto-professionals.co.uk/showthread.php?tid=6994 Tue, 15 Oct 2013 21:34:41 +0000 http://www.auto-professionals.co.uk/showthread.php?tid=6994 http://www.auto-professionals.co.uk/showthread.php?tid=6271 Thu, 15 Aug 2013 06:28:14 +0000 http://www.auto-professionals.co.uk/showthread.php?tid=6271