Opel OP-COM

[ishell]

(11-Nov-2012 06:59 PM)PsiDOC Wrote:  

(11-Nov-2012 01:41 PM)ishell Wrote:  Beware after update to 1,45 no way to downgrade of interface!

Yes you can. I have been up to firmwares 1.45 & 1.47 and back to 1.39 with no errors using OCflash.

Psi

So you lucky guy.

[mattydr67]

@ishell
http://www.auto-professionals.co.uk/show...97#pid3997
Try to use this tool and you'll go down to 1.39 if you like
OCflash it is a better tool but as I know this tool wasn't shared anymore nowhere. The only guy who have it is the one who made it.
Maybe Mr.PsiDOC it is that guy. Who knows.
Good luck


P.S. - take a look OCflash and op-com loader 1.3b in action
Downgrade from 1.47

ocflash.rar
File Type:
Downloaded:	497 times
Size:	114.6 KB

op-com loader 1.3b.rar
File Type:
Downloaded:	388 times
Size:	14.72 KB

[perotok]

Matty my friend

OCflash already has shared on internet

someone has shared with all of us


Cheers

[ishell]

Will tried ocflash today but op-com loader 1.3b and other shared flashers not working for me.
Firmware 1.45 .Opcom works but unstable.
Thanks to all

[mattydr67]

(11-Nov-2012 11:58 PM)perotok Wrote:  Matty my friend

OCflash already has shared on internet

someone has shared with all of us


Cheers

Hi my frined
Yes today Mr. PsiDOC showed to me that it was shared in polish forum.
Very good tool and very usefull.
@ishell
Mate if we can help you in anyway please share with us more details
Maybe you problem it is other then the one we talking
I want to tell you that if your tool it is totally erased and you have the message with not found not the message with any firmwear you cannot use this two softwears.
If the PIC it is totally erased you need to use an external PIC programmer
Tell use more to see what's your problem and maybe we can fix this
Good luck

[perotok]

You're right

it was shared in polish forum

Cheers

[manocao]

(11-Nov-2012 06:59 PM)PsiDOC Wrote:  

(11-Nov-2012 01:41 PM)ishell Wrote:  Beware after update to 1,45 no way to downgrade of interface!

Yes you can. I have been up to firmwares 1.45 & 1.47 and back to 1.39 with no errors using OCflash.

(11-Nov-2012 09:57 PM)mattydr67 Wrote:  OCflash it is a better tool but as I know this tool wasn't shared anymore nowhere. The only guy who have it is the one who made it.
Maybe Mr.PsiDOC it is that guy. Who knows.

(11-Nov-2012 11:58 PM)perotok Wrote:  Matty my friend
OCflash already has shared on internet
someone has shared with all of us

(12-Nov-2012 09:11 AM)mattydr67 Wrote:  Yes today Mr. PsiDOC showed to me that it was shared in polish forum.
Very good tool and very usefull.

(12-Nov-2012 11:10 AM)perotok Wrote:  You're right
it was shared in polish forum

i found OCflash that is supposed to be able to downgrade opcom firmware to 1.39 EVEN if it was upgraded to 1.41 or 1.43 or 1.44 or 1.45 by means of 2011 2012 official opcom software

no matter if you started some 2011 2012 official opcom version with interface plugged in computer, which would have upgraded to 1.43 or 1.44 but disabling bootloader

2011 and 2012 official software versions of opcom dont erase pic of interface but disable bootloader

ocflash doesnt work if you started some 2010 version with interface plugged in computer, which erased your interface's pic

OCflash

howto:

1. connect opcom interface through usb only
2. run ocflash
3. click on "request interface" to check actual version programmed on interface
4. if programmed version is 1.44 or 1.45 click "load firmware" and select fw139.hex from "Firmwarefiles" folder
5. click "change"
6. select "automatic mode" and click "flash"

[shaft]

(20-Nov-2012 05:22 PM)manocao Wrote:  

(11-Nov-2012 06:59 PM)PsiDOC Wrote:  

(11-Nov-2012 01:41 PM)ishell Wrote:  Beware after update to 1,45 no way to downgrade of interface!

Yes you can. I have been up to firmwares 1.45 & 1.47 and back to 1.39 with no errors using OCflash.

(11-Nov-2012 09:57 PM)mattydr67 Wrote:  OCflash it is a better tool but as I know this tool wasn't shared anymore nowhere. The only guy who have it is the one who made it.
Maybe Mr.PsiDOC it is that guy. Who knows.

(11-Nov-2012 11:58 PM)perotok Wrote:  Matty my friend
OCflash already has shared on internet
someone has shared with all of us

(12-Nov-2012 09:11 AM)mattydr67 Wrote:  Yes today Mr. PsiDOC showed to me that it was shared in polish forum.
Very good tool and very usefull.

(12-Nov-2012 11:10 AM)perotok Wrote:  You're right
it was shared in polish forum

i found a OCflash that is supposed to be able to downgrade opcom firmware to 1.39 EVEN if it was upgraded to 1.41 or 1.43 or 1.44 or 1.45 by means of 2011 2012 official opcom software

no matter if you started some 2011 2012 official opcom version with interface plugged in computer, which would have upgraded to 1.43 or 1.44 but disabling bootloader

2011 and 2012 official software versions of opcom dont erase pic of interface but disable bootloader

ocflash doesnt work if you started some 2010 version with interface plugged in computer, which erased your interface's pic

OCflash

howto:

1. connect opcom interface through usb only
2. run ocflash
3. click on "request interface" to check actual version programmed on interface
4. if programmed version is 1.44 or 1.45 click "load firmware" and select fw139.hex from "Firmwarefiles" folder
5. click "change"
6. select "automatic mode" and click "flash"

I have been searching the entire thread ==> http://www.auto-professionals.co.uk/show...php?tid=23 and couldn't find your WELCOME POST.
Can you do something about that? like you introducing yourself. Looks good you know

cheers

[manocao]

Ok, i introduced myself "again"
i mean, i'm old member of dk and others (garageforum was closed), but this is a different forum, i know, it's ok, i was just a little lazy, sorry shaft (moderator) and hello!
br

[jeslogo35]

OP-COM 080827 TR

OP-COM 080827 Turkish software

No need to crack!